In message <[email protected]>, Iljitsch van
Beijnum write
s:
> On 2 feb 2011, at 21:36, Lamar Owen wrote:
>
> > <put on op hat>
> > What I want is to add an IPv6 subnet or subnets to my already tuned =
> DHCP server config, add IPv6 addresses to the addresses handed out (in =
> the same config clause as the IPv4 addresses are stored, preferably), =
> update the DHCP server software to IPv6-capability, restart the DHCP =
> server, and both IPv4 and IPv6 clients get what they need, through the =
> same already locked down channels, with no other upgrades required.
>
> You can do that today. For instance, this is what I have in a test =
> setup. (However, the ISC dhcpd can only do either v4 or v6, not both at =
> the same time.)
Which is a limitation that we intend to address. It was more time
sensitive to get a DHCPv6 server out there than a integrated
DHCPv4/DHCPv6 server. No date has been set for this yet.
> subnet6 2001:960:7bf:d::/64
> {
> option dhcp6.name-servers 2001:1af8:2:5::2;
> option dhcp6.domain-search "bonjour.muada.nl";
> range6 2001:960:7bf:d::1000 2001:960:7bf:d::1fff;
> }
Mark
--
Mark Andrews, ISC
1 Seymour St., Dundas Valley, NSW 2117, Australia
PHONE: +61 2 9871 4742 INTERNET: [email protected]
