On Wed, Mar 09, 2011 at 08:52:54PM -0800, George Bonser wrote: > > No SNMP stats for virtual vlan interfaces and when asking Brocade > > about it, you get told "it is too hard to program". You gotta be > > kiddin me .... > > Yeah, that is something that has been bugging me. No stats on ve > interfaces. > > > Or how they do vlan configurations. > > I have complained about that, too. With Cisco you add vlans to ports, > with Brocade you add ports to vlans. Subtle difference. You can't look > at the config and very easily see which vlans are on which ports, you > have to do something like: > > show vlan e 1/1/1 > > and parse through the output. > > > > Or how a FCX stack will crash when you do jumbo frames. > > I have been running jumbo frames with stacked FCX units, no problems so > far. Running 7.2.00
This is with code 07.2.00aT7f3. Had two units stacked together, rebooted/power cycled at least once and it worked. Next time we had to power cycle due to a bad config apply, second unit came back and as soon it would join the stack, it crashed. Brocade wanted us to remove it from the stack (remotely) and/or disabled jumbo frames. -- Regards, Ulf. --------------------------------------------------------------------- Ulf Zimmermann, 1525 Pacific Ave., Alameda, CA-94501, #: 510-865-0204 You can find my resume at: http://www.Alameda.net/~ulf/resume.html
