What exactly do you mean by meaningful traffic? ICMP from port to port works, can you pass TCP? SSH between routers? Establish a TCP session over it?
Are you using Juniper SRXs ? :-) -- Leigh Porter On 19 Sep 2011, at 08:24, "jacob miller" <[email protected]> wrote: > I have tried the pings and am able to ping through with a size of 1600 with > the df-bit set > > without the df-bit am able to get up to 9000. > > The switched on bot ends hav been set to allow jumbo frames through and the > system MTU size and routing MTU sizes are at 1998. > The switch is a 2960 Cisco switch. > > I have set the mtu on the interface on the end router to 1600 and still > unable to push meaningful traffic. > > Regards, > jacob Miller > > > > ----- Original Message ----- > From: Randy Bush <[email protected]> > To: jacob miller <[email protected]> > Cc: "[email protected]" <[email protected]> > Sent: Monday, September 19, 2011 9:55 AM > Subject: Re: SDH Fiber Problem > >> I can ping on point to point >> I have BGP up and running >> When I try to pass traffic over the link my clients are unable to pass >> any meanigful traffic asn browsing is impossible. > > mtu? try various size pings. > > filters? > > randy > > > > ______________________________________________________________________ > This email has been scanned by the MessageLabs Email Security System. > For more information please visit http://www.messagelabs.com/email > ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
