Thx David,
PR587266 seems to be related to "maximum-packet-lenght" command that is not
present in my config.
Biggest problem in this case are dropped packet on interface:
Physical interface: xe-10/0/1, Enabled, Physical link is Up
Interface index: 363, SNMP ifIndex: 645, Generation: 483
Description: No Description
Link-level type: Ethernet, MTU: 1514, LAN-PHY mode, Speed: 10Gbps, Loopback:
None, Source filtering: Disabled,
Flow control: Enabled
Device flags : Present Running
Interface flags: SNMP-Traps Internal: 0x4000
Link flags : None
CoS queues : 8 supported, 8 maximum usable queues
Hold-times : Up 0 ms, Down 0 ms
Current address: 00:24:dc:49:be:73, Hardware address: 00:24:dc:49:be:73
Last flapped : 2011-10-27 03:11:07 UTC (1w5d 12:18 ago)
Statistics last cleared: 2011-11-08 13:15:03 UTC (02:14:38 ago)
Traffic statistics:
Input bytes : 4674308593808 5182909688 bps
Output bytes : 6092283580895 6656998280 bps
Input packets: 8393093736 1149495 pps
Output packets: 6971170539 941600 pps
IPv6 transit statistics:
Input bytes : 23569859
Output bytes : 0
Input packets: 197870
Output packets: 0
Dropped traffic statistics due to STP State:
Input bytes : 0
Output bytes : 0
Input packets: 0
Output packets: 0
Input errors:
Errors: 0, Drops: 0, Framing errors: 0, Runts: 0, Policed discards: 0, L3
incompletes: 0, L2 channel errors: 0,
L2 mismatch timeouts: 0, FIFO errors: 0, Resource errors: 0
Output errors:
Carrier transitions: 0, Errors: 0, Drops: 0, Collisions: 0, Aged packets:
0, FIFO errors: 0, HS link CRC errors: 0,
MTU errors: 0, Resource errors: 0
Egress queues: 8 supported, 8 in use
Queue counters: Queued packets Transmitted packets Dropped packets
0 be 6973872756 6887958719 85914037
1 ef 25695717 25695717 0
2 ef1 2062122 2062122 0
3 ef2 21430966 21430966 0
4 af 2605818 2605818 0
5 af1 1577987 1577987 0
6 nc 5928647 5928647 0
7 nc1 24705296 24705296 0
I'm wondering if is something related to CoS that is managed in different way
from the two type of linecard.
Regards
Antonio Ferretti
Network Engineer
Telecom Italia Sparkle
TIS.AD.NDO.O Backbone IP&Data Operations
Seabone 2nd Level Support
Via di Macchia Palocco, 223
00125 Roma, Italia
-----Messaggio originale-----
Da: [email protected] [mailto:[email protected]]
Inviato: martedì 8 novembre 2011 16.13
A: Ferretti Antonio; [email protected]
Oggetto: RE: Juniper MX960 Mqchip packet lenght error
Hi,
See the PR587266. Maybe you have Syslog/log statement in a FW filter term.
Regards
David
David Roy
Orange - IP Domestic Backbone - TAC
Tel. +33(0)299876472
Mob. +33(0)685522213
Email. [email protected]
Skype : davidroy.35
JNCIE-SP #703
Guest Haiku :
IS-IS screams,
BGP peers are flapping:
I want my mommy!
-----Message d'origine-----
De : Ferretti Antonio [mailto:[email protected]]
Envoyé : mardi 8 novembre 2011 15:35
À : [email protected]
Objet : Juniper MX960 Mqchip packet lenght error
Hi all,
After upgrading Juniper MX960 from 4x10Gbe DPCE to 16x10Gbe MPC, I see strange
log messages like this:
Fpc10 MQCHIP(0) LI Packet length error, pt entry 22
Seems to be only a "cosmetic" message, but today my team found some traffic
dropped on interface on this card (before we only request check about log
message).
Has anyone the same problem?
My software release is Junos 10.3R3.7.
Thanks in advance.
Antonio Ferretti
Network Engineer
Telecom Italia Sparkle
Backbone IP&Data Operations
Seabone 2nd Level Support
Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle persone
indicate. La diffusione, copia o qualsiasi altra azione derivante dalla
conoscenza di queste informazioni sono rigorosamente vietate. Qualora abbiate
ricevuto questo documento per errore siete cortesemente pregati di darne
immediata comunicazione al mittente e di provvedere alla sua distruzione,
Grazie.
This e-mail and any attachments is confidential and may contain privileged
information intended for the addressee(s) only. Dissemination, copying,
printing or use by anybody else is unauthorised. If you are not the intended
recipient, please delete this message and any attachments and advise the sender
by return e-mail, Thanks.
[cid:[email protected]]Rispetta l'ambiente. Non
stampare questa mail se non ? necessario.
********************************************************************************
IMPORTANT.Les informations contenues dans ce message electronique y compris les
fichiers attaches sont strictement confidentielles
et peuvent etre protegees par la loi.
Ce message electronique est destine exclusivement au(x) destinataire(s)
mentionne(s) ci-dessus.
Si vous avez recu ce message par erreur ou s il ne vous est pas destine,
veuillez immediatement le signaler a l expediteur et effacer ce message
et tous les fichiers eventuellement attaches.
Toute lecture, exploitation ou transmission des informations contenues dans ce
message est interdite.
Tout message electronique est susceptible d alteration.
A ce titre, le Groupe France Telecom decline toute responsabilite notamment s
il a ete altere, deforme ou falsifie.
De meme, il appartient au destinataire de s assurer de l absence de tout virus.
IMPORTANT.This e-mail message and any attachments are strictly confidential and
may be protected by law. This message is
intended only for the named recipient(s) above.
If you have received this message in error, or are not the named recipient(s),
please immediately notify the sender and delete this e-mail message.
Any unauthorized view, usage or disclosure ofthis message is prohibited.
Since e-mail messages may not be reliable, France Telecom Group shall not be
liable for any message if modified, changed or falsified.
Additionally the recipient should ensure they are actually virus free.
********************************************************************************
Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle persone
indicate. La diffusione, copia o qualsiasi altra azione derivante dalla
conoscenza di queste informazioni sono rigorosamente vietate. Qualora abbiate
ricevuto questo documento per errore siete cortesemente pregati di darne
immediata comunicazione al mittente e di provvedere alla sua distruzione,
Grazie.
This e-mail and any attachments is confidential and may contain privileged
information intended for the addressee(s) only. Dissemination, copying,
printing or use by anybody else is unauthorised. If you are not the intended
recipient, please delete this message and any attachments and advise the sender
by return e-mail, Thanks.
