Dear Tina, Thanks for your reply, I have done the same example you told but there is no native-vlan command inside interface eth 0/0. here my configuration and version of device, maybe firmare does not support it.
MA5616#display current-configuration > > [vlan-config] > <vlan-config> > vlan 2 smart > port vlan 2 0/0 0 > MA5616#display board 0 > ------------------------------------------------------------------------- > SlotID BoardName Status SubType0 SubType1 Online/Offline > ------------------------------------------------------------------------- > 0 H831CCUB Active_normal EP1A ASDA > 1 H835ADLE Auto_find > 2 H835ADLE Auto_find > 3 H835ADLE Auto_find > 4 H835ADLE Auto_find > 5 H831PDIA Normal > ------------------------------------------------------------------------- > MA5616#display version > > Command: > display version > > VERSION : MA5616V800R308C01 > PATCH : SPC200 SPH508 HP2108 > PRODUCT : MA5616 > > Mainboard Running Area Information: > -------------------------------------------- > Current Program Area : Area A > Current Data Area : Area A > > Program Area A Version : MA5616V800R308C01 > Program Area B Version : MA5616V800R308C01 > > Data Area A Version : MA5616V800R308C01 > Data Area B Version : MA5616V800R308C01 > -------------------------------------------- > MA5616(config)#interface eth 0/0 > > MA5616(config-if-eth-0/0)#? > --------------------------------------------- > Command of eth Mode: > --------------------------------------------- > auto-neg Enable/Disable port negotiation > combo-mode Switch working mode of COMBO port > display Display information > duplex Set duplex > flow-control Support flow control > line Line test > mdi Line-adaptive function > mirror Add mirror > network-role Network role > port Set TX optical power threshold > quit Exit from current mode and enter prior mode > reset Clear port statistics > return Enter the privileged mode > shutdown Deactivate port > speed Rate > switch Switch language mode > traffic-suppress Set port traffic suppression > undo Negate a command or set its defaults > Thanks On Mon, Aug 12, 2013 at 5:51 AM, Tina TSOU <[email protected]>wrote: > Dear all, > Only for the uplink GE, the native VLAN can be configured, it can not be > configured for NNI EPON/GPON and UNI DSL port. > > //if the uplink port is GE, then configure a new VLAN 2 > huawei(config)#vlan 2 > //add the uplink GE 0/0 0 to VLAN 2 > huawei(config)#port vlan 2 0/0 0 > //change to uplink card interface view > huawei(config)#interface eth 0/0 > //change native vlan of uplink GE to 2 > huawei(config-if-eth-0/0)#native-vlan 0 vlan 2 > > > Thank you, > Tina > > On Aug 11, 2013, at 6:44 AM, "Shahab Vahabzadeh" <[email protected]> > wrote: > > > Only these interface's are available under: > > > > MA5616(config)# interface ? > >> adsl > >> emu > >> eponnni > >> eth > >> gponnni > >> h248 > >> loopback > >> meth > >> null > >> shl > >> vdsl > >> vlanif > > > > > > Thanks > > > > > > On Sun, Aug 11, 2013 at 4:55 PM, Shahab Vahabzadeh > > <[email protected]>wrote: > > > >> Dear Georgi, > >> MA5616 does not have any SCU interface... > >> What can we do? > >> > >> > >> On Sun, Aug 11, 2013 at 4:17 PM, Georgi Genov <[email protected] > >wrote: > >> > >>> It`s configurable under scu/scuh/giu board > >>> > >>> interface scu 0/9 > >>> native-vlan 1 vlan XXXX > >>> native-vlan 2 vlan YYYY > >>> or > >>> interface giu 0/19 > >>> native-vlan 1 vlan XXXX > >>> native-vlan 2 vlan YYYY > >>> > >>> On 11.8.2013 г. 09:33 ч., Shahab Vahabzadeh wrote: > >>> > >>>> Dear Friends, > >>>> Anybody have idea about changing native vlan on Huawei MA5616 DSLAM? > >>>> I can not find the correct syntax, there is no option under "interface > >>>> eth > >>>> 0/0" > >>>> Thanks > >> > >> > >> -- > >> Regards, > >> Shahab Vahabzadeh, Network Engineer and System Administrator > >> > >> Cell Phone: +1 (415) 871 0742 > >> PGP Key Fingerprint = 8E34 B335 D702 0CA7 5A81 C2EE 76A2 46C2 5367 BF90 > > > > > > > > -- > > Regards, > > Shahab Vahabzadeh, Network Engineer and System Administrator > > > > Cell Phone: +1 (415) 871 0742 > > PGP Key Fingerprint = 8E34 B335 D702 0CA7 5A81 C2EE 76A2 46C2 5367 BF90 > -- Regards, Shahab Vahabzadeh, Network Engineer and System Administrator Cell Phone: +1 (415) 871 0742 PGP Key Fingerprint = 8E34 B335 D702 0CA7 5A81 C2EE 76A2 46C2 5367 BF90
