I've been using /36s per location, but hm -- great question.
How easy is it to get a larger allocation anyway? In RIPE, i.e: you just
ask and get a /29 with no questions asked.
On 10/9/2014 午後 11:31, Faisal Imtiaz wrote:
Selection of a default prefix is easy. Here are the steps.
4. Keeping in mind
4.1 Prefixes longer than somewhere around /48 to /56 may be
excluded from the global routing table
4.1a Prefix cutouts of any size (including /48) from inside your /32
or larger block may be excluded from the global routing table. Folks
who are multihomed and thus need to advertise their own block with BGP
should be referred to ARIN for a direct assignment. Folks who aren't
multihomed, well, until given evidence otherwise I claim there are no
single-homed entities who will use 65,000 LANs, let alone more.
=============================================
This brings up another interesting question...
We operate Two separate networks in two geographical locations (Two ASN), we
have a single /32 allocation from ARIN.
Question: Should we be asking ARIN for another /32 so that each network has
it's own /32 or should be break out the /32 into /36 and use these in each of
the geographies ?
Regards
Faisal Imtiaz
Snappy Internet & Telecom