----- Original Message ----- > From: "Rampley Jr, Jim F" <jim.ramp...@charter.com>
> On 12/29/14, 10:49 AM, "valdis.kletni...@vt.edu" > <valdis.kletni...@vt.edu> > wrote: > > >On Mon, 29 Dec 2014 03:44:48 +0000, "Stephen R. Carter" said: > >> Here is a small excerpt I am seeing. > >> > >> 06:04:04.760869 In 00:21:a0:fb:53:d9 > ff:ff:ff:ff:ff:ff, ethertype > >>ARP (0x0806), length 60: arp who-has 97.85.59.219 tell 97.85.58.1 > >> 06:04:04.761950 In 00:21:a0:fb:53:d9 > ff:ff:ff:ff:ff:ff, ethertype > >>ARP (0x0806), length 60: arp who-has 75.135.155.27 tell 75.135.152.1 > > > >The interesting thing is that they're all .1 addresses. It's almost > >as if > >the one broadcast domain has at least 7 different address spaces on > >it. > > Valdis, you are correct. What your seeing is caused by multiple IP > blocks being assigned to the same CMTS interface. Am I incorrect, though, in believing that ARP packets should only be visible within a broadcast domain, and that because of that, they should not be being passed through a cablemodem attached to such a CMTS interface unless they're within the IP network in which that interface lives (which is probably not 0/0)? This sounds like a firmware bug in either the CMTS or the cablemodem. Cheers, -- jra -- Jay R. Ashworth Baylink j...@baylink.com Designer The Things I Think RFC 2100 Ashworth & Associates http://www.bcp38.info 2000 Land Rover DII St Petersburg FL USA BCP38: Ask For It By Name! +1 727 647 1274