We run MPLS over wireless links of all kinds quite extensively. The key is to 
make sure that packet loss is at a minimum (duh), and to ensure that your 
wireless links have a large enough MTU to pass the additional bytes for each 
label. Other than that, we treat the wireless links as wires.

--
Tim Huffman
Staff Manager - Engineering | Windstream
999 Oak Creek Dr | Lombard, IL 60148
timothy.huff...@windstream.com | windstreambusiness.com 
o: 630.590.6012 | m: 630.340.1925 | f: 630.986.2496

-----Original Message-----
From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Spyros Kakaroukas
Sent: Friday, February 06, 2015 5:46 AM
To: 'sur...@mauigateway.com'; nanog@nanog.org
Subject: RE: mpls over microwave

Hey,

We run few mpls links ( 7600s/3600s on the mpls side mostly ) over Ceragon 
wireless gear. Nothing too fancy, I just treat them as switches ( or even just 
"cables" for some boxes,  not doing mac learning at all ). No issues whatsoever 
on the networking side.


My thoughts and words are my own.

Kind Regards,

Spyros

-----Original Message-----
From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Scott Weeks
Sent: Thursday, February 05, 2015 11:55 PM
To: nanog@nanog.org
Subject: mpls over microwave



Anyone doing MPLS over microwave radios?  Please share your experiences on list 
or off.

scott


This e-mail and any attachment(s) contained within are confidential and are 
intended only for the use of the individual to whom they are addressed. The 
information contained in this communication may be privileged, or exempt from 
disclosure. If the reader of this message is not the intended recipient, you 
are hereby notified that any dissemination, distribution, or copying of this 
communication is strictly prohibited. If you have received this communication 
in error, please notify the sender and delete the communication without 
retaining any copies. Rolaware Hellas SA is not responsible for, nor endorses, 
any opinion, recommendation, conclusion, solicitation, offer or agreement or 
any information contained in this communication.

----------------------------------------------------------------------
This email message and any attachments are for the sole use of the intended 
recipient(s). Any unauthorized review, use, disclosure or distribution is 
prohibited. If you are not the intended recipient, please contact the sender by 
reply email and destroy all copies of the original message and any attachments.

Reply via email to