Looks like what you want is the A920-CONS-KIT-S part. Description on it
is "ASR 920 Serial Console Cabling Kit" This is a $0 item when ordered
with the ASR920s. The other option is the A900-CONS-KIT-U which is the
USB-USB console kit.
http://www.cisco.com/c/en/us/td/docs/routers/asr920/hardware/installation/guide/ASR920_HIG/hw_installation.html#pgfId-1199994
Shows the adapter which I'm assuming is what's included in the kit, they
mention needing the RJ-45 to DB9 cable (normal Cisco console cable) in
addition to this ASR9XX specific adapter. Should be able to plug your
normal terminal server cables into the adapter cable listed above.
Hope this is helpful.
Jeremy "TheBrez" Bresley
b...@brezworks.com
On 12/7/2015 4:15 PM, Erik Sundberg wrote:
We have one of these nice new and fancy Cisco ASR920-24SZ, just realized it
doesn't have an RJ45 Console port only USB. When we deploy devices at our pop
we wire the console port to a terminal\console server, well that doesn't work
for a usb console device.
So what is everyone doing for out of band management via the console when it's
a usb only device?
Is there something I am missing?
Is there a console server for USB?
Does cisco make an USB to RJ45 Jack adapter?
________________________________
CONFIDENTIALITY NOTICE: This e-mail transmission, and any documents, files or
previous e-mail messages attached to it may contain confidential information
that is legally privileged. If you are not the intended recipient, or a person
responsible for delivering it to the intended recipient, you are hereby
notified that any disclosure, copying, distribution or use of any of the
information contained in or attached to this transmission is STRICTLY
PROHIBITED. If you have received this transmission in error please notify the
sender immediately by replying to this e-mail. You must destroy the original
transmission and its attachments without reading or saving in any manner. Thank
you.
