Lincoln, Why wouldn’t they? What is it Arista did others didn’t?
Cheers, Jeff From: lincoln dale <[email protected]<mailto:[email protected]>> Date: Monday, April 18, 2016 at 11:42 AM To: Colton Conor <[email protected]<mailto:[email protected]>> Cc: Jeff Tantsura <[email protected]<mailto:[email protected]>>, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: New Switches with Broadcom StrataDNX Yes. We also have 1M+ FIB support day one too - hence the letter 'R' denoting the evolution with 3rd generation of its evolution to internet edge/router use cases. Not sure what other vendors are doing but I doubt others are yet shipping large table support. (there's more to it than just the underlying native silicon) cheers, lincoln. ([email protected]<mailto:[email protected]>) On Mon, Apr 18, 2016 at 11:01 AM, Colton Conor <[email protected]<mailto:[email protected]>> wrote: As a follow up to this post, it look like the Arista 7500R series has this new chip inside of it. On Wed, Jan 20, 2016 at 9:34 AM, Jeff Tantsura <[email protected]<mailto:[email protected]>> wrote: > That's right, logic is in programming chips, not their property. You just > need to know what to program ;-) > > Regards, > Jeff > > > On Jan 19, 2016, at 10:10 PM, Mark Tinka > > <[email protected]<mailto:[email protected]>> wrote: > > > > > > > >> On 20/Jan/16 00:17, Phil Bedard wrote: > >> > >> Good point, there are many people looking at what I call FIB > optimization right now. The key is having the programmability on the > device to make it happen. Juniper/Cisco support it using policies to > filter RIB->FIB and I believe both also do per-NPU/PFE localized FIBs now. > I am not sure if that’s something supported on this new Broadcom chipset. > Depends on your network of course and where you are looking to position the > router. > > > > I don't think the FIB needs to have specific support for selective > > programming. > > > > I think that comes in the code to instruct the control plane what it > > should download to the FIB. > > > > Cisco's and Juniper's support of this is on FIB that has been in > > production long before the feature became available. It was just added > > to code. > > > > Mark. >
