Pretty much this, hoping somebody out there might have developed photographic training materials based on the DC cabling & installation section of TP76300 with illustrated "Do it like this, don't do this" examples. Or would be willing to share photographic examples of their own work which is done in an exemplary way.
On Mon, Jul 18, 2016 at 9:27 AM, Jameson, Daniel < [email protected]> wrote: > ATT TP76300, section 4 goes over installation best practices, although it > doesn't cover Engineering guidelines. It's adapted from the Telcordia GR > - 1275 standard, little easier to read. Is there a specific question > you're looking to answer? > > -----Original Message----- > From: NANOG [mailto:[email protected]] On Behalf Of Naslund, Steve > Sent: Monday, July 18, 2016 10:18 AM > To: [email protected] > Subject: RE: Best practices for telcoflex -48VDC cabling & other power OSI > layer 1 > > Not sure where to find it exactly but the Bellcore power wiring standard > is what is used for central office installations. I think if you google > Bellcore standard you will find what you are looking for. > > Steven Naslund > Chicago IL > > -----Original Message----- > From: NANOG [mailto:[email protected]] On Behalf Of Eric Kuhnke > Sent: Monday, July 18, 2016 11:12 AM > To: [email protected] > Subject: Best practices for telcoflex -48VDC cabling & other power OSI > layer 1 > > Hey all, > > > I'm looking for a document or set of photos/presentation on best practices > for telcoflex/-48VDC power cabling installation. Labeling, routing, > organization and termination, etc. Or a recommendation on a printed book > that covers this topic. > > Not necessarily fully oldschool "we're going to teach all the technicians > how to do the kansas city stitch" stuff, but the sort of thing that's > applicable in a modern colo/IP network environment. >
