Luke; All l2, no l3. only 4 vlans. 2 peers trunked to a router which trunks back to 2 devices (microwave backhauls).
Chuck; All ports are 10g except the 2 peers are 1g and trunk back to a 10g port for the router wan No TCN's Brian; I have tried a IBM G8124 and a Ubiquiti ES-16-XG both show same exact drops across all ports, makes me think it's a config issue. MTU, FC, something. Andrew; I have tried with FC disabled, but I will try that one more time. Mikael; Is it possible to over run the buffers of a 320gbps backplane switch with only 1.5gbps traffic? I think the switch is rated for 140m PPS and I'm only pushing 100k PPS On Tue, Nov 29, 2016 at 9:47 AM, Mikael Abrahamsson <[email protected]> wrote: > On Tue, 29 Nov 2016, TJ Trout wrote: > > Could this be MTU? I've tried flow control, hard code duplex, stp on/off >> etc >> > > As others have pointed out, you probably have a switch with small buffers. > > If you also have flow control and you have something that triggers flow > control to turn off packet forwarding, your small-buffer-switch might fill > up all (shared) buffers on that port and now you're dropping traffic to all > ports. > > So trying to find if you have something where flow control is enabled and > is being triggered might be something worthwhile to do, and also perhaps > just turn off flow control on all ports to make sure. > > -- > Mikael Abrahamsson email: [email protected] >
