Hi Marcel, I've personnel tested similar requirements on the followings;
ASR1001 - 8G RAM ASR1001-X ASR1002 8G RAM with two eBGP sessions / full routes via two upstreams and mutiple iBGP sessions to the core. The ASR1K is a safe bet. The ISR G2 2921 or 2951 suffers under load if you have PBR or NAT/PAT rules. Hope this info helps with your research and router selections. Cheers, Ahad On Tue, Sep 26, 2017 at 7:29 PM, marcel.duregards--- via NANOG < [email protected]> wrote: > Dear Nanoger, > > Anyone have an advice on CPE which can support the following features, > please: > > 1) > 1 Gigabits/s ipv4 or ipv6 forwarding IMIX or Internet traffic, full > duplex (not sure if cisco or miercom are conducting bidirectionals > traffic flows at the same time). > > 2) > with ACLs and with uRPF > with prefix filtering > with bgp ext-communities (rfc 8092 would be a ++, but not mandatory) > > 3) > with BGP full route, 1 eBGP session + 1 iBGP (--> multihomed, single > attached solution, so there is 2 CPE connected to 2 bgp transit)) > > 4) > vrf light and > SNMP + telnet/ssh with ACLs > > > Currently on Cisco side, we see the following candidates: > > - ASR 1001-x > - ASR 1002 > - ISR 4431, 4451 > - ISR G2 2921 + 2951 + 3925(E) (EoL soon, so we are currently in the > process of evaluating other solution). > > > But we would like also to include other manufacturer : juniper, mikrotik > , etc.... > > > Thank for your help, > > - > Marcel > > > > > > > >
