You can use Jool for both 464XLAT and just NAT64. I've done a workshop on this at the LACNIC meeting this week. See slides 43 and next ones:
http://www.lacnic.net/innovaportal/file/3139/1/ipv6-only_v11_16-9.pdf Saludos, Jordi -----Mensaje original----- De: NANOG <[email protected]> en nombre de Matt Hoppes <[email protected]> Fecha: miércoles, 26 de septiembre de 2018, 15:03 Para: North American Network Operators' Group <[email protected]> Asunto: Deploying IPv6 XLAT64 Looking at getting into IPv6 here ourselves... one of the big hold ups has been the dual stacking. Can anyone recommend a quality, not ridiculously convoluted to setup, XLAT64 translator that we could run in our network to take the IPv6 to an IPv4 address when the remote server doesn't have 6 capability? ********************************************** IPv4 is over Are you ready for the new Internet ? http://www.consulintel.es The IPv6 Company This electronic message contains information which may be privileged or confidential. The information is intended to be for the exclusive use of the individual(s) named above and further non-explicilty authorized disclosure, copying, distribution or use of the contents of this information, even if partially, including attached files, is strictly prohibited and will be considered a criminal offense. If you are not the intended recipient be aware that any disclosure, copying, distribution or use of the contents of this information, even if partially, including attached files, is strictly prohibited, will be considered a criminal offense, so you must reply to the original sender to inform about this communication and delete it.
