Hi Demetris,
You have to modify the _nxlib_ Makefile and not the Microwindows Makefile.
Matthias
On Thursday 24 January 2008 09:08, Demetris Zavorotnichenko wrote:
> I've downloaded the latest 0.45 NXlib and I want to install it with my
> crosscompiled Microwindows.
>
>
> In the "Install" file it says to modify a couple of parameters but I don't
> understand which ones. In Makefile or in Makefile.rules ?
>
> Do I have to enable something else also in the "config" file ?
>
> Here is what the "install" says :
>
> 1. Modify Makefile to set Microwindows and X11 include and lib directories
> MWIN=/usr2/microwin/src
> X11=/usr/X11R6
>
> Microwindows v0.90 or later must be used.
>
> 2. Modify Makefile to set X11 PCF font search directories (2)
> X11_FONT_DIR1=/usr/lib/X11/fonts/100dpi
> X11_FONT_DIR2=/usr/lib/X11/fonts/misc
>
> 3. Modify Makefile to set rgb.txt file location
> X11_RGBTXT=/usr/lib/X11/rgb.txt
>
> 4. Modify Makefile to enable X11 shared library and version if desired
> SHAREDLIB=Y
> LIBNAME = X11
> SOLIBREV = 6.2
> CFLAGS += -DXCONST=_Xconst
>
> Because of X11 hdr version inconstencies, you may need to set
> CFLAGS += -DXCONST=_Xconst or CFLAGS += -DXCONST=
> to compile _Xconst in or out of a couple of function declarations.
>
> 5. Type "make".
> This builds the library using your already-installed X11 headers.
> If DEBUG = -g, a larger library will be built with debug
> information.
> If INCLUDE_XRM=Y, unmodified Xrm database routines will be included.
>
> 6. DO NOT "make install" UNTIL YOU BACK UP THE FOLLOWING LIBRARIES.
> NOTE "make install" WILL BY DEFAULT OVERWRITE THE FOLLOWING FILES:
>
> /usr/X11R6/lib/libX11.so.*
> (/usr/X11R6/lib/libX11.so /usr/X11R6/lib/libX11.so.6
> /usr/X11R6/lib/libX11.so.6.2)
>
>
>
>
>
> And here is my MakeFile :
>
>
> ############################################################################
> ##
> # Microwindows top-level Makefile
> # Copyright (c) 2000 Martin Jolicoeur, Greg Haerr
> ############################################################################
> ##
>
> ifndef MW_DIR_SRC
> MW_DIR_SRC := $(CURDIR)
> endif
> MW_DIR_RELATIVE :=
> include $(MW_DIR_SRC)/Path.rules
> include $(CONFIG)
>
> ############################# targets section
> ################################
>
> # If you want to create a library with the objects files, define the name
> here
> LIBNAME =
> LIBNAMESO =
>
> # List of objects to compile
> OBJS =
>
> # demos should be built after the libs !
> dirs := \
> $(MW_DIR_SRC)/drivers \
> $(MW_DIR_SRC)/mwin \
> $(MW_DIR_SRC)/engine \
> $(MW_DIR_SRC)/fonts \
> $(MW_DIR_SRC)/nanox
>
> all: default
> ifeq ($(ARCH), RTEMS)
> $(MAKE) -C $(MW_DIR_SRC)/rtems
> else
> -$(MAKE) -C $(MW_DIR_SRC)/demos
> endif
> ifeq ($(ARCH), ECOS)
> $(MAKE) -C $(MW_DIR_SRC)/ecos
> endif
>
> .PHONY: realclean
>
> realclean: clean
> ifeq ($(MW_DIR_OBJ),$(MW_DIR_SRC))
> $(MAKE) -C $(MW_DIR_SRC)/fonts realclean
> $(MAKE) -C $(MW_DIR_SRC)/mwin/bmp realclean
> endif
>
> #
> # Documentation targets:
> #
> # doc - All HTML docs.
> # pdfdoc - All HTML and PDF docs - i.e. everything.
> # doc-nanox - Documentation for public API - HTML.
> # pdfdoc-nanox - Documentation for public API - HTML and PDF.
> # doc-internal - Documentation for everything, including internal
> # functions - HTML.
> #
> # Note that there are no internal PDF docs - the internal APIs
> # change, so printed docs are less useful.
> #
> # Also note that PDF requires a working LaTEX install. HTML will
> # work without LaTEX.
> #
> # The docs end up in microwin/doc/{nano-X,internal}/{html,latex}/
> #
> .PHONY: doc doc-internal doc-nanox pdfdoc pdfdoc-nanox
>
> doc: doc-internal doc-nanox
> @#
> pdfdoc: doc-internal pdfdoc-nanox
> @#
> doc-internal:
> doxygen Doxyfile-internal
> doc-nanox:
> doxygen Doxyfile-nanox
> pdfdoc-nanox: doc-nanox
> cd ../doc/nano-X/latex && $(MAKE)
> doc-clean:
> rm -rf ../doc/nano-X ../doc/internal
>
> ######################### Makefile.rules section
> #############################
>
> include $(MW_DIR_SRC)/Makefile.rules
>
> ######################## Tools targets section
> ###############################
>
>
>
> So where should I modify this things ?
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>
--
-------------------------------------------------------------------------
Dipl.-Ing. Matthias Fuchs
SD4
esd electronic system design gmbh
Vahrenwalder Str. 207 - 30165 Hannover - GERMANY
Telefon: 0511-37298-0 - Fax: 0511-37298-68
Bitte besuchen Sie uns im Internet unter http://www.esd.eu
Quality Products - Made in Germany
-------------------------------------------------------------------------
Geschäftsführer: Klaus Detering, Dr. Werner Schulze
Amtsgericht Hannover HRB 51373 - VAT-ID DE 115672832
-------------------------------------------------------------------------
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
