Thanks Vinod.. sorry for the late response. It is working with /dev/mice. The user interface driver for mouse (mousedev.c) was absent in my kernel image. Problem was solved once I added the driver.
-- Thanks and Regards, Mangesh Edake. On Wed, 2008-10-01 at 19:17 +0530, Vinod Chaudhary wrote: > Hi, > > I think you are using linux kernel so build the Device Drivers ---> Input > device support --->Mouse interface and specify screen resolution with that > driver. Use "/dev/mice" interface created by this interface. > > Because on "/dev/input/event0" provide the raw data and not calibrated. > > For the keypad you have to write driver like scan_kbd.c to read from > ""/dev/input/event0" or "/dev/input/event1" where your keyboard is attached. > > Thanks, > Vinod > > > ----- Original Message ----- > From: "Mangesh Edake (ext)" <[EMAIL PROTECTED]> > To: <nanogui@linuxhacker.org> > Sent: Wednesday, October 01, 2008 6:29 PM > Subject: [nanogui] problem with USB mouse and keyboard > > > > Hello all, > > > > I am having following setup on ARM9 Linux board, > > microwin/nano-X => CVS snapshot > > nxlib-0.45 > > fltk-1.1.6 > > > > The microwin/nano-X configuration I'm using is config.uclibc with > > SERMOUSE=Y and SCANKBD=Y. > > > > I am using USB keyboard and Mouse as input devices, which gets detected > > as soon as connected to board. But when I run fltk demo or the nano-X > > demo application, mouse pointer gets displayed on middle of the screen > > and as mouse is slightly moved, the pointer goes to the top of the > > screen and stays there. For any further movement, it moves horizontally > > at the top of the screen. Also the fltk demo detects random click events > > and opens too many windows and finally hangs.... > > > > I have MOUSE_PORT=/dev/mouse which is symlink to /dev/input/event1 and > > MOUSE_TYPE=ps2 in mou_ser.c. Also tried with ms, pc and logi MOUSE_TYPE > > but the behavior is same. > > > > With USB keyboard I could not test the alphanumeric keys because > > application hangs due to mouse... although keys like tab( for > > navigation), space (for selection) and escape (for exit) works to some > > extent. > > > > I am executing fltk demo this way, > > > > microwin # ./bin/nano-X & > > > > fltk # ./test/demo > > > > > > Is it that microwin/nano-X need special handling for USB-HID, as X11 has > > something like mouUSBRead()..? > > > > I may be doing something wrong... but I hope someone on the list would > > suggest some solution. > > > > Thanks in anticipation. > > > > -- > > Best Regards, > > Mangesh Edake. > > > > > > > > > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > Email Scanned for Virus & Dangerous Content by : www.CleanMailGateway.com > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
