> > I am using the following source (diff for microwin is attached): > > micrown (Nano-X) > nxlib latest git source > LibVNCServer-0.9.9 > freetype-2.4.8 > > The attached diffs contain changes to get VNC to link properly, but also some > customization > for my application (paths, no VNC passwd, version timestamp, UTF-8 support > and debug messages) > > VNC is connecting and mostly working. The issue I have is small screen image > changes > do not get updated. The only way to get those changes is to wait for a large > change or > hit the refresh button on the VNC client.
I assume you're running the latest (git) microwindows source. Are you testing this on X11 or a framebuffer device? If so, the reason that you're likely not getting screen updates is that the new blit routines don't update automatically, they require a call to the psd->Update() procedure with the coordinates of the screen that have been modified. If you look at some of the routines in engine/convblit*.c, you'll see how this is used. Thus, in your driver, after performing the draw code, you'll want to call psd->Update with the bounding rect of the areas modified. There is the possibility this is not the issue, but this is definitely required when using X11 or non-framebuffer due to the new drawing architecture with backing store. I haven't looked at your changes yet, as I'm still buried at work. Regards, Greg --------------------------------------------------------------------- To unsubscribe, e-mail: nanogui-unsubscr...@linuxhacker.org For additional commands, e-mail: nanogui-h...@linuxhacker.org
