Thank you again Gustaf, I've done a build of the latest version and the behaviour we were seeing previously with "location" has been restored.
On Thu, 28 Jan 2021 at 18:40, Gustaf Neumann <neum...@wu.ac.at> wrote: > Dear David, > > The i could reproduce the problems, which showed up only for > configurations with local network drivers (loading the driver > in the server specific section, not in the global section). > > In general, the definition over the global section is recommended, > since it supports virtual hosting. Nevertheless, also the "old style" > local definitions should continue to work. The computation is > somewhat complex, since one cannot trust the content of the > host header field blindly, and since a single driver can listen > on many IP addresses and ports and connect to multiple virtual > servers. > > The updated version in the public repository computes now the value > of [ns_conn location] (and the redirect target) is computed by > the following rules. > > Globally defined network driver (recommended installation, supports > virtual hosting) > a) Use content of host header field, when the value is configured as an > accepted host for one of the servers. > b) If the host value is different, fall back to the default server > (a default server has to be configured). > c) If the request has no host header field, fall back to the default > server. > > Per-server network driver: > a) Use content of host header field, when the valued is configured as an > accepted host for the server. > b) If the host value is different or missing (allowed in HTTP/1.0), > fall back to the value as configured in the driver parameter > "location". > c) If the driver parameter "location" is not given, use the actual > local IP address and port for determining the location. > > Please check whether this works as well with your configurations. > > all the best > > -gn > > > > _______________________________________________ > naviserver-devel mailing list > naviserver-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/naviserver-devel > -- *David Osborne | Software Engineer* Qcode Software, Castle House, Fairways Business Park, Inverness, IV2 6AA *Email:* da...@qcode.co.uk | *Phone:* 01463 896 484 www.qcode.co.uk
_______________________________________________ naviserver-devel mailing list naviserver-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/naviserver-devel
