--- You wrote:
--- In [EMAIL PROTECTED], [EMAIL PROTECTED] wrote: > How do I search the beachcats archives for the discussion about replacing > rudder cams in my H16? > Thanks in advance, > Bob H16 Do you really need the archive? I've done mine and they were extremely easy to replace. You simply drill out one side of the old rivits which were originally installed, replace the cams and insert nice little screws that replace the old rivets. You might want to take out the spring and plunger that manages the kickup resistance. But in my case one derlin screw was so damaged I couldnt remove it, so I put one cam in while pushing the cam against the plunger. -Don C. Group Home http://www.TheBeachcats.com Yahoo! Groups Links --- end of quote --- Thanks Don, It sounds like I'm on the right track at replacing after reading your email. Mine has the 2 little screws on either side or the cam. I just cannot break the seized screws. I'd drill them out if the place that sold me the rudder cams had sent the little screws also! However, they told me I would not need them? It's a balmy 30$B0F in Sunapee NH this morning and it doesn't look like I'll have chance to put my H16 in the lake again until after winter. So I will work on the cams as a winter project. Thanks for all the helpful email guys... Bob H16 Group Home http://www.TheBeachcats.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/beachcats/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
