a) It will control both.
b, c) Does not apply. This is not a drive, it is a controller. You attach your drives to it. Mariss --- In [EMAIL PROTECTED], Kim Lux <[EMAIL PROTECTED]> wrote: > > A couple questions on the G2002: > > a) servo or stepper ? > > b) what is the maximum motor voltage ? > > c) what is the maximum motor current ? > > d) is there a way to read the machine position after an emergency > shutdown, ie are the encoders powered separately from the motors and is > there a communication link between the PC and the axes position > registers ? > > > > > On Fri, 2004-12-03 at 15:41 +0000, Mariss Freimanis wrote: > > > > Hi, > > > > The G204V "Vampire" drive design is finished. The first 100 beta > > units will be available at the beginning of January. > > > > That means I'm back on the G2002 (G2005?) project. The FPGA for the > > design is being coded right now. In summary, the G2002 will have: > > > > 1) 6 axis of step / direction (up to 4 MHz step rate) > > 2) 6 axies of encoder feedback (CH-A, CH-B, Index and Fault) > > 3) 8 analog output channels (+/-10V, 0-5V) > > 4) 8 analog input channels (0-5V) > > 5) 16 general purpose outputs (5-24VDC, 100mA) > > 6) 16 general purpose inputs (+/- 100V protected) > > 7) USB interface, USB powered > > > > Mariss > > > > > > > > --- In [EMAIL PROTECTED], Jon Elson <[EMAIL PROTECTED]> wrote: > > > R Rogers wrote: > > > > > > >Wasn't Art Fenerty working on a system like this for Mach2? He > > referred to it as a "cube" or something like that? Basically a remote > > pulse generator. However, I understood it was to work from the > > parallel port. Maybe he already released it and I'm unaware of it. > > > > > > > > > > > Yes, hardware by Mariss Freimanis of Gecko Drives, called the > > G2002, I > > > think. There is a group > > > of people working on it. It runs through the USB, I believe. > > > > > > Jon > > > > > > > > > > > > Addresses: > > FAQ: http://www.ktmarketing.com/faq.html > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/ > > Post Messages: [EMAIL PROTECTED] > > > > Subscribe: [EMAIL PROTECTED] > > Unsubscribe: [EMAIL PROTECTED] > > List owner: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED] > > Moderator: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [Moderators] > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO > > > > OFF Topic POSTS: General Machining > > If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble. > > http://www.metalworking.com/news_servers.html > > > > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list. > > > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ > > bill > > List Mom > > List Owner > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > -- > Kim Lux (Mr.) Diesel Research Inc Addresses: FAQ: http://www.ktmarketing.com/faq.html FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/ Post Messages: [EMAIL PROTECTED] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED] Moderator: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] [Moderators] URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO OFF Topic POSTS: General Machining If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble. http://www.metalworking.com/news_servers.html http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list. NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill List Mom List Owner Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
