I have made the following changes intended for : CE:Adaptation:PandaBoard / tofrodos CE:Adaptation:PandaBoard / pvr-omap4 CE:Adaptation:PandaBoard / pvr-omap4-kernel CE:Adaptation:PandaBoard / kernel-adaptation-pandaboard CE:Adaptation:PandaBoard / u-boot-omap4panda CE:Adaptation:PandaBoard / x-loader-omap4panda
Please review and accept or decline. BOSS has already run some checks on this request. See the "Messages from BOSS" section below. https://build.pub.meego.com//request/show/3155 Thank You, bossbot ([email protected]) [This message was auto-generated] --- Request # 3155: Messages from BOSS: INFO check_package_built_at_source (pvr-omap4): Build status is 'excluded' for CE_Adaptation_PandaBoard_armv7hl/armv8el (against CE:Adaptation:PandaBoard/Mer_Core_armv7hl/armv8el). Could not notify CE-maintainers (no address found) State: review 2011-11-19T12:14:58 bossbot Reviews: accepted by bossbot : Prechecks completed; none failed. new by None Changes: submit: home:sage:Mer:Adaptation:pandaboard / tofrodos -> CE:Adaptation:PandaBoard / tofrodos changes files: -------------- ++++++ new changes file: --- tofrodos.changes +++ tofrodos.changes @@ -0,0 +1,6 @@ +* Fri Nov 18 2011 Marko Saukko <[email protected]> - 1.7.9 +- Updated to 1.7.9 +- Added .yaml for spectacle + +* Fri Aug 05 2011 Joe Konno <[email protected]> - 1.7.8 +- Repackaged for MeeGo new: ---- tofrodos-1.7.9.tar.gz tofrodos.changes tofrodos.spec tofrodos.yaml spec files: ----------- ++++++ new spec file: --- tofrodos.spec +++ tofrodos.spec @@ -0,0 +1,72 @@ +# +# Do NOT Edit the Auto-generated Part! +# Generated by: spectacle version 0.23 +# +# >> macros +# << macros + +Name: tofrodos +Summary: DOS/UNIX text file conversion tool +Version: 1.7.9 +Release: 1 +Group: Applications/Text +License: GPLv2 +URL: http://www.thefreecountry.com/tofrodos/ +Source0: http://tofrodos.sourceforge.net/download/%{name}-%{version}.tar.gz +Source100: tofrodos.yaml + + +%description +DOS text files traditionally have CR/LF (carriage return/line feed) +pairs as their new line delimiters while Unix text files traditionally +have LFs (line feeds) to terminate each line. + +tofrodos comprises two programs, "fromdos" and "todos", which convert +text files to and from these formats. Use "fromdos" to convert DOS +text files to the Unix format, and "todos" to convert Unix text files +to the DOS format. + + + + +%prep +%setup -q -n %{name}/src + +# >> setup +# << setup + +%build +# >> build pre +make +# << build pre + + + +# >> build post +# << build post +%install +rm -rf %{buildroot} +# >> install pre +# << install pre + +# >> install post +install -d $RPM_BUILD_ROOT{%{_bindir},%{_mandir}/man1} +install -m 0755 fromdos $RPM_BUILD_ROOT%{_bindir} +install -m 0644 fromdos.1 $RPM_BUILD_ROOT%{_mandir}/man1 +ln -sf fromdos $RPM_BUILD_ROOT%{_bindir}/todos +# << install post + + + + + + +%files +%defattr(-,root,root,-) +# >> files +%{_bindir}/fromdos +%{_bindir}/todos +%{_mandir}/man1/fromdos.1* +# << files + + other changes: -------------- ++++++ tofrodos-1.7.9.tar.gz (new) ++++++ tofrodos.yaml (new) --- tofrodos.yaml +++ tofrodos.yaml @@ -0,0 +1,21 @@ +Name: tofrodos +Summary: DOS/UNIX text file conversion tool +Version: 1.7.9 +Release: 1 +Group: Applications/Text +License: GPLv2 +URL: http://www.thefreecountry.com/tofrodos/ +Sources: + - http://tofrodos.sourceforge.net/download/%{name}-%{version}.tar.gz +Description: | + DOS text files traditionally have CR/LF (carriage return/line feed) + pairs as their new line delimiters while Unix text files traditionally + have LFs (line feeds) to terminate each line. + + tofrodos comprises two programs, "fromdos" and "todos", which convert + text files to and from these formats. Use "fromdos" to convert DOS + text files to the Unix format, and "todos" to convert Unix text files + to the DOS format. + +Configure: none +Builder: none submit: home:sage:Mer:Adaptation:pandaboard / pvr-omap4 -> CE:Adaptation:PandaBoard / pvr-omap4 changes files: -------------- ++++++ new changes file: --- pvr-omap4.changes +++ pvr-omap4.changes @@ -0,0 +1,2 @@ +* Thu Nov 03 2011 Marko Saukko <[email protected]> - 1.7.9.0.1.5 +- Initial packaging based on linaro packages. new: ---- pvr-omap4-bf15ed7.tar.gz pvr-omap4.changes pvr-omap4.spec pvr-omap4.yaml spec files: ----------- ++++++ new spec file: --- pvr-omap4.spec +++ pvr-omap4.spec @@ -0,0 +1,254 @@ +# +# Do NOT Edit the Auto-generated Part! +# Generated by: spectacle version 0.23 +# +# >> macros +# << macros + +Name: pvr-omap4 +Summary: PowerVR SGX540 libraries for OMAP4. +Version: 1.7.9.0.1.5 +Release: 0 +Group: Graphics/Display and Graphics Adaptation +License: TI Proprietary +ExclusiveArch: armv7l armv7el +URL: http://git.linaro.org/gitweb?p=people/rsalveti/pvr-omap4.git +Source0: pvr-omap4-bf15ed7.tar.gz +Source100: pvr-omap4.yaml +Requires(post): /sbin/ldconfig +Requires(postun): /sbin/ldconfig + + +%description +PowerVR SGX540 Linux libraries for OMAP4. +This package contains the remaining binaries and common libraries. + + + +%package devel +Summary: PowerVR SGX540 support development files +Group: Development/Libraries +Requires: %{name} = %{version}-%{release} + +%description devel +This package provides common development files for PowerVR SGX. + + +%package libEGL +Summary: EGL for SGX +Group: Development/Libraries +Requires: %{name} = %{version}-%{release} +Requires(post): /sbin/ldconfig +Requires(postun): /sbin/ldconfig +Provides: libEGL = %{version}-%{release} +Provides: libEGL.so.1 + +%description libEGL +This package.. + + +%package libEGL-devel +Summary: EGL development headers for SGX +Group: Development/Libraries +Requires: %{name} = %{version}-%{release} +Requires: %{name}-libEGL = %{version}-%{release} +Requires: %{name}-devel = %{version}-%{release} +Provides: libEGL-devel + +%description libEGL-devel +This package.. + + +%package libGLESv1 +Summary: GLESv1 for SGX +Group: Development/Libraries +Requires: %{name} = %{version}-%{release} +Requires(post): /sbin/ldconfig +Requires(postun): /sbin/ldconfig +Provides: libGLESv1 = %{version}-%{release} +Provides: libGLES_CM.so.1 + +%description libGLESv1 +This package.. + + +%package libGLESv1-devel +Summary: GLESv1 development headers for SGX +Group: Development/Libraries +Requires: %{name} = %{version}-%{release} +Requires: %{name}-libGLESv1 = %{version}-%{release} +Requires: %{name}-devel = %{version}-%{release} +Provides: libGLESv1-devel + +%description libGLESv1-devel +This package.. + + +%package libGLESv2 +Summary: GLESv2 for SGX +Group: Development/Libraries +Requires: %{name} = %{version}-%{release} +Requires(post): /sbin/ldconfig +Requires(postun): /sbin/ldconfig +Provides: libGLESv2 = %{version}-%{release} +Provides: libGLESv2.so.2 + +%description libGLESv2 +This package.. + + +%package libGLESv2-devel +Summary: GLESv2 development headers for SGX +Group: Development/Libraries +Requires: %{name} = %{version}-%{release} +Requires: %{name}-libGLESv2 = %{version}-%{release} +Requires: %{name}-devel = %{version}-%{release} +Provides: libGLESv2-devel + +%description libGLESv2-devel +This package.. + + + +%prep +%setup -q -n pvr-omap4-bf15ed7 + +# >> setup +# << setup + +%build +# >> build pre +# << build pre + + + +# >> build post +# << build post +%install +rm -rf %{buildroot} +# >> install pre +install -d %{buildroot}/ +cp -arv usr/ %{buildroot}/ +chmod 755 %{buildroot}/%{_libdir}/*.so.1.* +# << install pre + +# >> install post +# << install post + + + +%post -p /sbin/ldconfig + +%postun -p /sbin/ldconfig + + + + + + +%post libEGL -p /sbin/ldconfig + +%postun libEGL -p /sbin/ldconfig + + + + + +%post libGLESv1 -p /sbin/ldconfig + +%postun libGLESv1 -p /sbin/ldconfig + + + + + +%post libGLESv2 -p /sbin/ldconfig + +%postun libGLESv2 -p /sbin/ldconfig + + + + +%files +%defattr(-,root,root,-) +# >> files +%doc license.txt +%{_libdir}/libIMGegl*.so +%{_libdir}/libglslcompiler*.so +%{_libdir}/libpvr2d*.so +%{_libdir}/libsrv_um.so* +%{_libdir}/libPVRScopeServices* +#%{_libdir}/libTIPVR2DBLT.so* +%{_libdir}/libpvrPVR2D_DRIWSEGL.so* +%{_libdir}/libglslcompiler.so.* +%{_libdir}/libpvr2d.so.* +%{_libdir}/libsrv_init.so* +%{_libdir}/libusc.so* +# Should be in it's own package. +%{_bindir}/xovg_unit_test +%{_libdir}/libOpenVG*.so* +# Xorg stuff +%{_libdir}/xorg/modules/drivers/pvr_drv.so +%{_datadir}/X11/xorg.conf.d/99-pvr.conf +%{_datadir}/sgx-lib +%{_datadir}/doc +# << files + + +%files devel +%defattr(-,root,root,-) +# >> files devel +%doc license.txt +#%{_libdir}/pkgconfig/*.pc +%{_includedir}/VG/openvg.h +%{_includedir}/VG/vgu.h +# << files devel + +%files libEGL +%defattr(-,root,root,-) +# >> files libEGL +%doc license.txt +%{_bindir}/xeglinfo +%{_bindir}/xmultiegltest +%{_libdir}/libEGL.so* +%{_libdir}/libIMGegl.so.* +# << files libEGL + +%files libEGL-devel +%defattr(-,root,root,-) +# >> files libEGL-devel +%doc license.txt +%{_includedir}/KHR/*.h +%{_includedir}/EGL/*.h +# << files libEGL-devel + +%files libGLESv1 +%defattr(-,root,root,-) +# >> files libGLESv1 +%doc license.txt +%{_bindir}/xgles1test1 +%{_libdir}/libGLESv1_CM.so* +# << files libGLESv1 + +%files libGLESv1-devel +%defattr(-,root,root,-) +# >> files libGLESv1-devel +%doc license.txt +%{_includedir}/GLES/*.h +# << files libGLESv1-devel + +%files libGLESv2 +%defattr(-,root,root,-) +# >> files libGLESv2 +%doc license.txt +%{_bindir}/xgles2test1 +%{_libdir}/libGLESv2.so* +# << files libGLESv2 + +%files libGLESv2-devel +%defattr(-,root,root,-) +# >> files libGLESv2-devel +%doc license.txt +%{_includedir}/GLES2/*.h +# << files libGLESv2-devel + other changes: -------------- ++++++ pvr-omap4-bf15ed7.tar.gz (new) ++++++ pvr-omap4.yaml (new) --- pvr-omap4.yaml +++ pvr-omap4.yaml @@ -0,0 +1,84 @@ +Name: pvr-omap4 +Summary: PowerVR SGX540 libraries for OMAP4. +Version: 1.7.9.0.1.5 +Release: 0 +Group: Graphics/Display and Graphics Adaptation +License: TI Proprietary +URL: http://git.linaro.org/gitweb?p=people/rsalveti/pvr-omap4.git +Sources: + - pvr-omap4-bf15ed7.tar.gz + +Description: | + PowerVR SGX540 Linux libraries for OMAP4. + This package contains the remaining binaries and common libraries. + +SetupOptions: -q -n pvr-omap4-bf15ed7 +Configure: none +Builder: none +ExclusiveArch: "armv7l armv7el" +SubPackages: + - Name: devel + Summary: PowerVR SGX540 support development files + Group: Development/Libraries + Description: | + This package provides common development files for PowerVR SGX. + + - Name: libEGL + Summary: EGL for SGX + Group: Development/Libraries + Description: | + This package.. + Provides: + - libEGL = %{version}-%{release} + - libEGL.so.1 + + - Name: libEGL-devel + Summary: EGL development headers for SGX + Group: Development/Libraries + Description: | + This package.. + Requires: + - "%{name}-libEGL = %{version}-%{release}" + - "%{name}-devel = %{version}-%{release}" + Provides: + - libEGL-devel + + - Name: libGLESv1 + Summary: GLESv1 for SGX + Group: Development/Libraries + Description: | + This package.. + Provides: + - libGLESv1 = %{version}-%{release} + - libGLES_CM.so.1 + + - Name: libGLESv1-devel + Summary: GLESv1 development headers for SGX + Group: Development/Libraries + Description: | + This package.. + Requires: + - "%{name}-libGLESv1 = %{version}-%{release}" + - "%{name}-devel = %{version}-%{release}" + Provides: + - libGLESv1-devel + + - Name: libGLESv2 + Summary: GLESv2 for SGX + Group: Development/Libraries + Description: | + This package.. + Provides: + - libGLESv2 = %{version}-%{release} + - libGLESv2.so.2 + + - Name: libGLESv2-devel + Summary: GLESv2 development headers for SGX + Group: Development/Libraries + Description: | + This package.. + Requires: + - "%{name}-libGLESv2 = %{version}-%{release}" + - "%{name}-devel = %{version}-%{release}" + Provides: + - libGLESv2-devel submit: home:sage:Mer:Adaptation:pandaboard / pvr-omap4-kernel -> CE:Adaptation:PandaBoard / pvr-omap4-kernel changes files: -------------- ++++++ new changes file: --- pvr-omap4-kernel.changes +++ pvr-omap4-kernel.changes @@ -0,0 +1,5 @@ +* Thu Nov 17 2011 Marko Saukko <[email protected]> - 1.7.9.0.1.3 +- Added depmod call to post. + +* Mon Nov 07 2011 Marko Saukko <[email protected]> - 1.7.9.0.1.3 +- Initial packaging. new: ---- pvr-omap4-kernel-042d707.tar.gz pvr-omap4-kernel.changes pvr-omap4-kernel.spec pvr-omap4-kernel.yaml spec files: ----------- ++++++ new spec file: --- pvr-omap4-kernel.spec +++ pvr-omap4-kernel.spec @@ -0,0 +1,81 @@ +# +# Do NOT Edit the Auto-generated Part! +# Generated by: spectacle version 0.23 +# +# >> macros +#%define kernel_version %{expand:%(rpm -q --qf '[%%{version}]' kernel-adaptation-pandaboard)} +%define kernel_version 3.1.0-rc10 +#-%%{release} +# << macros + +Name: pvr-omap4-kernel +Summary: Kernel driver for OMAP4 PVR. +Version: 1.7.9.0.1.3 +Release: 1 +Group: Kernel +License: GPLv2 +URL: http://git.linaro.org/gitweb?p=people/rsalveti/pvr-omap4-kernel.git +Source0: pvr-omap4-kernel-042d707.tar.gz +Source100: pvr-omap4-kernel.yaml +Requires: /sbin/depmod +Requires: kernel-adaptation-pandaboard +BuildRequires: tofrodos +BuildRequires: kernel-adaptation-pandaboard-devel + + +%description +OMAP4 PVR driver. + + + +%prep +%setup -q -n %{name}-042d707 + +# >> setup +# << setup + +%build +# >> build pre +cd sgx +chmod 644 COPYING INSTALL README +cd eurasiacon/build/linux2/omap4430_linux/ +make clean +make clobber +make V=1 W=1 KERNELDIR="%{_prefix}/src/kernels/3.1.0-rc10/" %{?jobs:-j%jobs} +# << build pre + + + +# >> build post +# << build post +%install +rm -rf %{buildroot} +# >> install pre +mkdir -p %{buildroot}/lib/modules/%{kernel_version}/kernel/ +cp sgx/eurasiacon/binary2_omap4430_linux_release/target/omapdrm_pvr.ko %{buildroot}/lib/modules/%{kernel_version}/kernel/ +# << install pre + +# >> install post +# << install post + + + +%post +# >> post +/sbin/depmod -a -F /boot/System.map-%{kernel_version} %{kernel_version} +# << post + +%postun +# >> postun +/sbin/depmod -a -F /boot/System.map-%{kernel_version} %{kernel_version} +# << postun + + +%files +%defattr(-,root,root,-) +# >> files +%doc sgx/COPYING +/lib/modules/%{kernel_version}/kernel/omapdrm_pvr.ko +# << files + + other changes: -------------- ++++++ pvr-omap4-kernel-042d707.tar.gz (new) ++++++ pvr-omap4-kernel.yaml (new) --- pvr-omap4-kernel.yaml +++ pvr-omap4-kernel.yaml @@ -0,0 +1,19 @@ +Name: pvr-omap4-kernel +Summary: Kernel driver for OMAP4 PVR. +Description: OMAP4 PVR driver. +Version: 1.7.9.0.1.3 +Release: 1 +URL: http://git.linaro.org/gitweb?p=people/rsalveti/pvr-omap4-kernel.git +Group: Kernel +License: GPLv2 +Configure: none +Builder: none +PkgBR: +# - dos2unix + - tofrodos + - kernel-adaptation-pandaboard-devel +Requires: + - /sbin/depmod + - kernel-adaptation-pandaboard +Sources: + - "pvr-omap4-kernel-042d707.tar.gz" submit: home:sage:Mer:Adaptation:pandaboard / kernel-adaptation-pandaboard -> CE:Adaptation:PandaBoard / kernel-adaptation-pandaboard changes files: -------------- ++++++ new changes file: --- kernel-adaptation-pandaboard.changes +++ kernel-adaptation-pandaboard.changes @@ -0,0 +1,2 @@ +* Mon Oct 31 2011 Marko Saukko <[email protected]> - 3.1.0~rc10 +- Initial kernel packaging. new: ---- kernel-adaptation-pandaboard.changes kernel-adaptation-pandaboard.config kernel-adaptation-pandaboard.spec kernel-adaptation-pandaboard.yaml kernel-b24ce0d.tar.gz spec files: ----------- ++++++ new spec file: --- kernel-adaptation-pandaboard.spec +++ kernel-adaptation-pandaboard.spec @@ -0,0 +1,155 @@ +# +# Do NOT Edit the Auto-generated Part! +# Generated by: spectacle version 0.23 +# +# >> macros +%define kernel_version 3.1.0-rc10 +%define kernel_devel_dir %{_prefix}/src/kernels/%{kernel_version} +# << macros + +Name: kernel-adaptation-pandaboard +Summary: Kernel Adaptation Pandaboard +Version: 3.1.0~rc10 +Release: 1 +Group: Kernel +License: GPLv2 +ExclusiveArch: %{arm} +URL: http://git.linaro.org/gitweb?p=people/andygreen/kernel-tilt.git;a=shortlog;h=refs/heads/tilt-linux-linaro-3.1 +Source0: kernel-b24ce0d.tar.gz +Source1: %{name}.config +Source100: kernel-adaptation-pandaboard.yaml +BuildRequires: u-boot-omap4panda-tools +Provides: kernel = %{kernel_version} + + +%description +Kernel for Pandaboard. + + +%package devel +Summary: Devel files for pandaboard kernel +Group: Development/System +Requires: %{name} = %{version}-%{release} +Provides: kernel-devel = %{kernel_version} + +%description devel +Devel for pandaboard kernel + + + +%prep +%setup -q -n kernel-b24ce0d + +# >> setup +# << setup + +%build +# >> build pre +cp %{SOURCE1} ./.config +#make oldconfig +make %{?jobs:-j%jobs} uImage +make %{?jobs:-j%jobs} modules +#make %{?jobs:-j%jobs} prepare +# << build pre + + + +# >> build post +# << build post +%install +rm -rf %{buildroot} +# >> install pre + +# Modules +make INSTALL_MOD_PATH=%{buildroot} modules_install +mkdir -p %{buildroot}/boot/ +make INSTALL_PATH=%{buildroot}/boot/ install +install -m 755 arch/arm/boot/uImage %{buildroot}/boot/ +mkdir -p %{buildroot}/lib/modules/%{kernel_version}/ +touch %{buildroot}/lib/modules/%{kernel_version}/modules.dep + +# Config +cp .config %{buildroot}/boot/config-%{kernel_version} + +# And save the headers/makefiles etc for building modules against +# +# This all looks scary, but the end result is supposed to be: +# * all arch relevant include/ files +# * all Makefile/Kconfig files +# * all script/ files + +#rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source +mkdir -p %{buildroot}/%{kernel_devel_dir} +#(cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source) +# dirs for additional modules per module-init-tools, kbuild/modules.txt +# first copy everything +cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` %{buildroot}/%{kernel_devel_dir} +cp Module.symvers %{buildroot}/%{kernel_devel_dir} +cp System.map %{buildroot}/%{kernel_devel_dir} +if [ -s Module.markers ]; then +cp Module.markers %{buildroot}/%{kernel_devel_dir} +fi +# then drop all but the needed Makefiles/Kconfig files +rm -rf %{buildroot}/%{kernel_devel_dir}/Documentation +rm -rf %{buildroot}/%{kernel_devel_dir}/scripts +rm -rf %{buildroot}/%{kernel_devel_dir}/include +cp .config %{buildroot}/%{kernel_devel_dir} +cp -a scripts %{buildroot}/%{kernel_devel_dir} +if [ -d arch/%{_arch}/scripts ]; then +cp -a arch/%{_arch}/scripts %{buildroot}/%{kernel_devel_dir}/arch/%{_arch} || : +fi +if [ -f arch/%{_arch}/*lds ]; then +cp -a arch/%{_arch}/*lds %{buildroot}/%{kernel_devel_dir}/arch/%{_arch}/ || : +fi +rm -f %{buildroot}/%{kernel_devel_dir}/scripts/*.o +rm -f %{buildroot}/%{kernel_devel_dir}/scripts/*/*.o +cp -a --parents arch/arm/include %{buildroot}/%{kernel_devel_dir} +cp -a --parents arch/arm/mach-*/include %{buildroot}/%{kernel_devel_dir} +cp -a --parents arch/arm/plat-*/include %{buildroot}/%{kernel_devel_dir} +mkdir -p %{buildroot}/%{kernel_devel_dir}/include +cd include +cp -a acpi asm-generic config crypto drm generated keys linux math-emu media mtd net pcmcia rdma rxrpc scsi sound video trace %{buildroot}/%{kernel_devel_dir}/include + +# Make sure the Makefile and version.h have a matching timestamp so that +# external modules can be built +touch -r %{buildroot}/%{kernel_devel_dir}/Makefile %{buildroot}/%{kernel_devel_dir}/include/linux/version.h +touch -r %{buildroot}/%{kernel_devel_dir}/.config %{buildroot}/%{kernel_devel_dir}/include/linux/autoconf.h +# Copy .config to include/config/auto.conf so "make prepare" is unnecessary. +cp %{buildroot}/%{kernel_devel_dir}/.config %{buildroot}/%{kernel_devel_dir}/include/config/auto.conf +cd .. + +# HACKS +#sudo sed -i 's/-Werror-implicit-function-declaration//g' %{buildroot}/%{kernel_devel_dir}/Makefile + + +# << install pre + +# >> install post +# << install post + + + + + + + + + +%files +%defattr(-,root,root,-) +/lib/modules/%{kernel_version}/* +/boot/System.map-%{kernel_version} +/boot/vmlinux-%{kernel_version} +/boot/uImage +/boot/config-%{kernel_version} +# >> files +# << files + + +%files devel +%defattr(-,root,root,-) +/%{_prefix}/src/kernels/%{kernel_version}/* +/%{_prefix}/src/kernels/%{kernel_version}/.config +# >> files devel +# << files devel + other changes: -------------- ++++++ kernel-adaptation-pandaboard.config (new) --- kernel-adaptation-pandaboard.config +++ kernel-adaptation-pandaboard.config @@ -0,0 +1,2873 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/arm 3.1.0-rc10 Kernel Configuration +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_HAVE_SCHED_CLOCK=y +CONFIG_GENERIC_GPIO=y +# CONFIG_ARCH_USES_GETTIMEOFFSET is not set +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_KTIME_SCALAR=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_LOCKBREAK=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_VECTORS_BASE=0xffff0000 +# CONFIG_ARM_PATCH_PHYS_VIRT is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_HAVE_IRQ_WORK=y +CONFIG_IRQ_WORK=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_FHANDLE is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_HAVE_GENERIC_HARDIRQS=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_HARDIRQS=y +CONFIG_HAVE_SPARSE_IRQ=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_IRQ_DOMAIN=y +# CONFIG_SPARSE_IRQ is not set + +# +# RCU Subsystem +# +CONFIG_TREE_PREEMPT_RCU=y +CONFIG_PREEMPT_RCU=y +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_RCU_BOOST is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +# CONFIG_CPUSETS is not set +CONFIG_CGROUP_CPUACCT=y +# CONFIG_RESOURCE_COUNTERS is not set +# CONFIG_CGROUP_PERF is not set +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +# CONFIG_BLK_CGROUP is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +# CONFIG_SCHED_AUTOGROUP is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EXPERT=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +# CONFIG_EMBEDDED is not set +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +CONFIG_PERF_COUNTERS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_BSGLIB is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set (2674 more lines skipped) ++++++ kernel-adaptation-pandaboard.yaml (new) --- kernel-adaptation-pandaboard.yaml +++ kernel-adaptation-pandaboard.yaml @@ -0,0 +1,45 @@ +Name: kernel-adaptation-pandaboard +Summary: Kernel Adaptation Pandaboard +Description: Kernel for Pandaboard. +Version: 3.1.0~rc10 +Release: 1 +Group: Kernel +License: GPLv2 +Configure: none +Builder: none +URL: http://git.linaro.org/gitweb?p=people/andygreen/kernel-tilt.git;a=shortlog;h=refs/heads/tilt-linux-linaro-3.1 +ExclusiveArch: "%{arm}" +PkgBR: + - "u-boot-omap4panda-tools" +Sources: + - kernel-b24ce0d.tar.gz + #- "linux-3.1.tar.bz2" + - "%{name}.config" +Provides: + - "kernel = %{kernel_version}" + +#SetupOptions: -q -n linux-3.1 +SetupOptions: -q -n kernel-b24ce0d +#Patches: +# - 0001a-omap4-pandaboard-wlan-fix.patch +# - 0003-omap4-pandaboard-dvi720p.patch +# - 0006-omap4-usb-improvement.patch +# - Omap44xx-i2c-fix.patch +Files: + - "/lib/modules/%{kernel_version}/*" + - "/boot/System.map-%{kernel_version}" + - "/boot/vmlinux-%{kernel_version}" + - "/boot/uImage" + - "/boot/config-%{kernel_version}" + +SubPackages: + - Name: devel + Summary: Devel files for pandaboard kernel + Group: Development/System + Description: | + Devel for pandaboard kernel + Provides: + - "kernel-devel = %{kernel_version}" + Files: + - "/%{_prefix}/src/kernels/%{kernel_version}/*" + - "/%{_prefix}/src/kernels/%{kernel_version}/.config" ++++++ kernel-b24ce0d.tar.gz (new) submit: home:sage:Mer:Adaptation:pandaboard / u-boot-omap4panda -> CE:Adaptation:PandaBoard / u-boot-omap4panda changes files: -------------- ++++++ new changes file: --- u-boot-omap4panda.changes +++ u-boot-omap4panda.changes @@ -0,0 +1,19 @@ +* Fri Nov 18 2011 Marko Saukko <[email protected]> - 2011.06 +- Update to version 2011.09 + +* Tue Oct 10 2010 Nishanth Menon <[email protected]> - 2010.09-MeeGo +- Add Das u-boot package - FEA#9723 + +* Tue Oct 10 2010 Nishanth Menon <[email protected]> - 2010.09.rc1-MeeGo +- Added option to enable boot.scr generation and copy + +* Mon Oct 4 2010 Nishanth Menon <[email protected]> - 2010.09.rc1-MeeGo +- Update to 2010.09 + +* Wed Sep 14 2010 Nishanth Menon <[email protected]> - 2010.09.rc1-MeeGo +- Update to 2010.09.rc1 +- MeeGo customization +- Enabled PandaBoard, Beagleboard build + +* Wed Mar 31 2010 Silvan Calarco <[email protected]> - 2009.11.1-1mamba +- update to 2009.11.1 new: ---- meego_panda.scr u-boot-2011.06.tar.bz2 u-boot-omap4panda.changes u-boot-omap4panda.spec u-boot-omap4panda.yaml spec files: ----------- ++++++ new spec file: --- u-boot-omap4panda.spec +++ u-boot-omap4panda.spec @@ -0,0 +1,121 @@ +# +# Do NOT Edit the Auto-generated Part! +# Generated by: spectacle version 0.23 +# +# >> macros +# << macros + +Name: u-boot-omap4panda +Summary: The u-boot firmware for the omap4_panda ARM platform +Version: 2011.06 +Release: 1 +Group: System/Boot +License: GPL +ExclusiveArch: %{arm} +URL: http://www.denx.de/wiki/U-Boot +Source0: ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2 +Source1: meego_panda.scr +Source100: u-boot-omap4panda.yaml + + +%description +Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. +This package contains the firmware for the omap4_panda ARM platform. + + + +%package doc +Summary: Documentation for the u-boot Firmware +Group: System/Boot Documentation +Requires: %{name} = %{version}-%{release} + +%description doc +Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. +This package contains documentation for u-boot firmware + + +%package tools +Summary: Tools for the u-boot Firmware +Group: System/Boot +Requires: %{name} = %{version}-%{release} + +%description tools +Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. +This package contains: +mkimage- a tool that creates kernel bootable images for u-boot. + + + +%prep +%setup -q -n u-boot-%{version} + +# >> setup +# << setup + +%build +# >> build pre +# << build pre + + + +# >> build post +make omap4_panda_config +make all +make env +# << build post +%install +rm -rf %{buildroot} +# >> install pre +# << install pre + +# >> install post +install -D -m 0755 tools/mkimage %{buildroot}%{_bindir}/mkimage +install -D -m 0644 doc/mkimage.1 %{buildroot}%{_mandir}/man1/mkimage.1 +gzip %{buildroot}%{_mandir}/man1/* +install -D -m 0644 u-boot.bin %{buildroot}/boot/u-boot.bin +install -D -m 0644 u-boot.map %{buildroot}/boot/u-boot.map +install -D -m 0644 %{SOURCE1} %{buildroot}/boot/boot.scr +# << install post + + + + + + + + + + + + +%files +%defattr(-,root,root,-) +# >> files +/boot/u-boot.bin +/boot/u-boot.map +/boot/boot.scr +# << files + + +%files doc +%defattr(-,root,root,-) +# >> files doc +# Generic documents +%doc COPYING CREDITS README doc/README.JFFS2 doc/README.JFFS2_NAND doc/README.commands +%doc doc/README.autoboot doc/README.commands doc/README.console doc/README.dns +%doc doc/README.hwconfig doc/README.nand doc/README.NetConsole doc/README.serial_multi +%doc doc/README.SNTP doc/README.standalone doc/README.update doc/README.usb +%doc doc/README.video doc/README.VLAN doc/README.silent doc/README.POST doc/README.Modem +# Copy some useful kermit scripts as well +%doc tools/scripts/dot.kermrc tools/scripts/flash_param tools/scripts/send_cmd tools/scripts/send_image +# Now any h/w dependent Documentation +%doc doc/README.ARM-SoC doc/README.ARM-memory-map +# << files doc + +%files tools +%defattr(-,root,root,-) +# >> files tools +%{_bindir}/mkimage +%{_mandir}/man1/mkimage.1.gz +# << files tools + other changes: -------------- ++++++ meego_panda.scr (new) Binary files meego_panda.scr added ++++++ u-boot-2011.06.tar.bz2 (new) ++++++ u-boot-omap4panda.yaml (new) --- u-boot-omap4panda.yaml +++ u-boot-omap4panda.yaml @@ -0,0 +1,33 @@ +Name: u-boot-omap4panda +Summary: The u-boot firmware for the omap4_panda ARM platform +Version: 2011.06 +Release: 1 +Group: System/Boot +License: GPL +URL: http://www.denx.de/wiki/U-Boot +Sources: + - ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2 + - meego_panda.scr +Description: | + Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. + This package contains the firmware for the omap4_panda ARM platform. + +Configure: none +Builder: none +ExclusiveArch: "%{arm}" +SubPackages: + - Name: doc + Summary: Documentation for the u-boot Firmware + Group: System/Boot Documentation + Description: | + Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. + This package contains documentation for u-boot firmware + + - Name: tools + Summary: Tools for the u-boot Firmware + Group: System/Boot + Description: | + Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. + This package contains: + mkimage- a tool that creates kernel bootable images for u-boot. + submit: home:sage:Mer:Adaptation:pandaboard / x-loader-omap4panda -> CE:Adaptation:PandaBoard / x-loader-omap4panda changes files: -------------- ++++++ new changes file: --- x-loader-omap4panda.changes +++ x-loader-omap4panda.changes @@ -0,0 +1,3 @@ +* Mon Nov 18 2011 Marko Saukko <[email protected]> - 1.5.1 +- Initial packaging for Mer/Nemo +- Remade the whole packaging new: ---- 0001-igep00x0-beagle-and-omap3evm-fixing-bug-at-prcm_init.patch 0002-Fix-warning-in-lib-board.c.patch 0003-Fix-warning-in-include-asm-arch-i2c.h.patch 0004-Fix-warning-in-cpu-omap3-mmc.c.patch x-loader-1.5.1-compile.patch x-loader-1.5.1-eabi-compat.patch x-loader-1.5.1-enable-debug.patch x-loader-1.5.1.tar.bz2 x-loader-omap4panda.changes x-loader-omap4panda.spec x-loader-omap4panda.yaml spec files: ----------- ++++++ new spec file: --- x-loader-omap4panda.spec +++ x-loader-omap4panda.spec @@ -0,0 +1,108 @@ +# +# Do NOT Edit the Auto-generated Part! +# Generated by: spectacle version 0.23 +# +# >> macros +# << macros + +Name: x-loader-omap4panda +Summary: The x-loader firmware for the %{TARGET_BOARD} %{TARGET_CPU} platform +Version: 1.5.1 +Release: 1 +Group: System/Boot +License: GPL +ExclusiveArch: %{arm} +URL: http://gitorious.org/x-loader/x-loader +Source0: x-loader-%{version}.tar.bz2 +Source100: x-loader-omap4panda.yaml +Patch0: 0001-igep00x0-beagle-and-omap3evm-fixing-bug-at-prcm_init.patch +Patch1: 0002-Fix-warning-in-lib-board.c.patch +Patch2: 0003-Fix-warning-in-include-asm-arch-i2c.h.patch +Patch3: 0004-Fix-warning-in-cpu-omap3-mmc.c.patch +Patch4: x-loader-1.5.1-compile.patch +Patch5: x-loader-1.5.1-eabi-compat.patch +Patch6: x-loader-1.5.1-enable-debug.patch + + +%description +X-Loader is 2nd stage loader loaded by OMAP BootRom to start 3rd stage tool like +U-Boot. +This package contains the firmware for the %{TARGET_BOARD} %{TARGET_CPU} platform. + + + +%package doc +Summary: Documentation for the x-loader Firmware +Group: System/Boot Documentation +Requires: %{name} = %{version}-%{release} + +%description doc +X-Loader is 2nd stage loader loaded by OMAP BootRom to start 3rd stage tool like +U-Boot. +This package contains documentation for x-loader firmware + + + +%prep +%setup -q -n x-loader-%{version} + +# 0001-igep00x0-beagle-and-omap3evm-fixing-bug-at-prcm_init.patch +%patch0 -p1 +# 0002-Fix-warning-in-lib-board.c.patch +%patch1 -p1 +# 0003-Fix-warning-in-include-asm-arch-i2c.h.patch +%patch2 -p1 +# 0004-Fix-warning-in-cpu-omap3-mmc.c.patch +%patch3 -p1 +# x-loader-1.5.1-compile.patch +%patch4 -p1 +# x-loader-1.5.1-eabi-compat.patch +%patch5 -p1 +# x-loader-1.5.1-enable-debug.patch +%patch6 -p1 +# >> setup +# << setup + +%build +# >> build pre +# << build pre + + + +# >> build post +make distclean +make ARCH=arm CROSS_COMPILE= omap4430panda_config +make ARCH=arm CROSS_COMPILE= ift +# << build post +%install +rm -rf %{buildroot} +# >> install pre +# << install pre + +# >> install post +install -D -m 0755 MLO %{buildroot}/boot/MLO +install -D -m 0644 x-load.map %{buildroot}/boot/x-load-omap4430panda.map +# << install post + + + + + + + + + +%files +%defattr(-,root,root,-) +# >> files +/boot/MLO +/boot/x-load-omap4430panda.map +# << files + + +%files doc +%defattr(-,root,root,-) +# >> files doc +%doc README +# << files doc + other changes: -------------- ++++++ 0001-igep00x0-beagle-and-omap3evm-fixing-bug-at-prcm_init.patch (new) --- 0001-igep00x0-beagle-and-omap3evm-fixing-bug-at-prcm_init.patch +++ 0001-igep00x0-beagle-and-omap3evm-fixing-bug-at-prcm_init.patch @@ -0,0 +1,69 @@ +From 745d564dc95db61a4488cb98e747b207dbb80621 Mon Sep 17 00:00:00 2001 +From: Ricardo Salveti de Araujo <[email protected]> +Date: Wed, 3 Aug 2011 19:18:25 -0700 +Subject: [PATCH 1/4] igep00x0, beagle and omap3evm: fixing bug at prcm_init + +Commit 73eb46434657c8c2c9e7c9146406031fc4d124ce changed get_cpu_rev() +to be a generic function for all omap 3 based boards, to remove +duplicated code. As a side effect, the behavior changed for beagle and +omap3evm when the board is based on 37XX, returning a different value +then CPU3430_ES2, causing a bug at prcm_init. + +The fix is already applied for overo, as you can see from commit +24b8b7f41a83540433024854736518876257672c, changing the index calculation +to behave correctly with all board revs. This patch only applies the +same fix for the other omap 3 based boards that could be affected. + +BugLink: https://bugs.launchpad.net/ubuntu/+source/x-loader/+bug/813407 + +Signed-off-by: Ricardo Salveti de Araujo <[email protected]> +Acked-by: Enric Balletbo i Serra <[email protected]> +Signed-off-by: Anand Gadiyar <[email protected]> +--- + board/igep00x0/igep00x0.c | 2 +- + board/omap3530beagle/omap3530beagle.c | 2 +- + board/omap3evm/omap3evm.c | 2 +- + 3 files changed, 3 insertions(+), 3 deletions(-) + +diff --git a/board/igep00x0/igep00x0.c b/board/igep00x0/igep00x0.c +index 5550741..df32062 100644 +--- a/board/igep00x0/igep00x0.c ++++ b/board/igep00x0/igep00x0.c +@@ -169,7 +169,7 @@ void prcm_init(void) + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ +- sil_index = get_cpu_rev() - 1; ++ sil_index = !(get_cpu_rev() == CPU_3XX_ES10); + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); +diff --git a/board/omap3530beagle/omap3530beagle.c b/board/omap3530beagle/omap3530beagle.c +index 102c6d9..ba52ea7 100644 +--- a/board/omap3530beagle/omap3530beagle.c ++++ b/board/omap3530beagle/omap3530beagle.c +@@ -439,7 +439,7 @@ void prcm_init(void) + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ +- sil_index = get_cpu_rev() - 1; ++ sil_index = !(get_cpu_rev() == CPU_3XX_ES10); + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); +diff --git a/board/omap3evm/omap3evm.c b/board/omap3evm/omap3evm.c +index 6048964..5eabc26 100644 +--- a/board/omap3evm/omap3evm.c ++++ b/board/omap3evm/omap3evm.c +@@ -271,7 +271,7 @@ void prcm_init(void) + * and sil_index will get the values for that SysClk for the + * appropriate silicon rev. + */ +- sil_index = get_cpu_rev() - 1; ++ sil_index = !(get_cpu_rev() == CPU_3XX_ES10); + + /* Unlock MPU DPLL (slows things down, and needed later) */ + sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS); +-- +1.7.4.4 + ++++++ 0002-Fix-warning-in-lib-board.c.patch (new) --- 0002-Fix-warning-in-lib-board.c.patch +++ 0002-Fix-warning-in-lib-board.c.patch @@ -0,0 +1,30 @@ +From a4477db23543dfec0f3e1f36b6f4b98ab38d4796 Mon Sep 17 00:00:00 2001 +From: Enric Balletbo i Serra <[email protected]> +Date: Wed, 3 Aug 2011 19:20:24 -0700 +Subject: [PATCH 2/4] Fix warning in lib/board.c + +This patch fixes following warning: + board.c: In function .init_func_i2c.: + board.c:55:2: warning: implicit declaration of function .i2c_init. + +Signed-off-by: Enric Balletbo i Serra <[email protected]> +Signed-off-by: Anand Gadiyar <[email protected]> +--- + lib/board.c | 1 + + 1 files changed, 1 insertions(+), 0 deletions(-) + +diff --git a/lib/board.c b/lib/board.c +index fac5f77..0f6b960 100644 +--- a/lib/board.c ++++ b/lib/board.c +@@ -31,6 +31,7 @@ + */ + + #include <common.h> ++#include <i2c.h> + #include <part.h> + #include <fat.h> + #include <asm/arch/mem.h> +-- +1.7.4.4 + ++++++ 0003-Fix-warning-in-include-asm-arch-i2c.h.patch (new) --- 0003-Fix-warning-in-include-asm-arch-i2c.h.patch +++ 0003-Fix-warning-in-include-asm-arch-i2c.h.patch @@ -0,0 +1,31 @@ +From a09cc3fa3b6c6dfa391c2cd62d48e3f5536f6bec Mon Sep 17 00:00:00 2001 +From: Enric Balletbo i Serra <[email protected]> +Date: Wed, 3 Aug 2011 19:20:27 -0700 +Subject: [PATCH 3/4] Fix warning in include/asm/arch/i2c.h + +This patch fixes following warnings: + include/asm/arch/i2c.h:89:65: warning: "/*" within comment + include/asm/arch/i2c.h:90:8: warning: "/*" within comment + +Signed-off-by: Enric Balletbo i Serra <[email protected]> +Signed-off-by: Anand Gadiyar <[email protected]> +--- + include/asm/arch-omap3/i2c.h | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/include/asm/arch-omap3/i2c.h b/include/asm/arch-omap3/i2c.h +index 5fb0979..28ae5ca 100644 +--- a/include/asm/arch-omap3/i2c.h ++++ b/include/asm/arch-omap3/i2c.h +@@ -86,7 +86,7 @@ + #define I2C_CON_BE (1 << 14) /* Big endian mode */ + #define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */ + #define I2C_CON_MST (1 << 10) /* Master/slave mode */ +-#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode /* ++#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode */ + /* (master mode only) */ + #define I2C_CON_XA (1 << 8) /* Expand address */ + #define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */ +-- +1.7.4.4 + ++++++ 0004-Fix-warning-in-cpu-omap3-mmc.c.patch (new) --- 0004-Fix-warning-in-cpu-omap3-mmc.c.patch +++ 0004-Fix-warning-in-cpu-omap3-mmc.c.patch @@ -0,0 +1,35 @@ +From c4289f1bee035dea41536c5ba5e1bc36c7d493c4 Mon Sep 17 00:00:00 2001 +From: Enric Balletbo i Serra <[email protected]> +Date: Wed, 3 Aug 2011 19:20:29 -0700 +Subject: [PATCH 4/4] Fix warning in cpu/omap3/mmc.c + +This patch fixes following warning: + mmc.c: In function .mmc_init.: + mmc.c:543:26: warning: assignment from incompatible pointer type + +Signed-off-by: Enric Balletbo i Serra <[email protected]> +Signed-off-by: Anand Gadiyar <[email protected]> +--- + cpu/omap3/mmc.c | 4 ++-- + 1 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/cpu/omap3/mmc.c b/cpu/omap3/mmc.c +index e0c63b0..3d53fae 100644 +--- a/cpu/omap3/mmc.c ++++ b/cpu/omap3/mmc.c +@@ -516,10 +516,10 @@ unsigned char configure_mmc(mmc_card_data *mmc_card_cur) + return 1; + } + unsigned long mmc_bread(int dev_num, unsigned long blknr, lbaint_t blkcnt, +- void *dst) ++ unsigned long *dst) + { + omap_mmc_read_sect(blknr, (blkcnt * MMCSD_SECTOR_SIZE), &cur_card_data, +- (unsigned long *) dst); ++ dst); + return 1; + } + +-- +1.7.4.4 + ++++++ x-loader-1.5.1-compile.patch (new) --- x-loader-1.5.1-compile.patch +++ x-loader-1.5.1-compile.patch @@ -0,0 +1,20 @@ +diff -ruN --exclude='*~' x-loader-1.5.1.orig/cpu/omap4/config.mk x-loader-1.5.1/cpu/omap4/config.mk +--- x-loader-1.5.1.orig/cpu/omap4/config.mk 2011-10-31 19:58:55.269214392 +0200 ++++ x-loader-1.5.1/cpu/omap4/config.mk 2011-10-31 23:04:31.711088682 +0200 +@@ -19,8 +19,7 @@ + # Foundation, Inc., 59 Temple Place, Suite 330, Boston, + # MA 02111-1307 USA + # +-PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ +- -msoft-float -Werror ++PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 + + PLATFORM_CPPFLAGS += -march=armv7-a + # ========================================================================= +@@ -28,5 +27,5 @@ + # Supply options according to compiler version + # + # ========================================================================= +-PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) ++PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32) + PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) ++++++ x-loader-1.5.1-eabi-compat.patch (new) --- x-loader-1.5.1-eabi-compat.patch +++ x-loader-1.5.1-eabi-compat.patch @@ -0,0 +1,28 @@ +diff -ruN --exclude='*~' x-loader-1.5.1.orig/lib/eabi_compat.c x-loader-1.5.1/lib/eabi_compat.c +--- x-loader-1.5.1.orig/lib/eabi_compat.c 1970-01-01 02:00:00.000000000 +0200 ++++ x-loader-1.5.1/lib/eabi_compat.c 2011-11-18 20:58:13.581532454 +0200 +@@ -0,0 +1,12 @@ ++int raise (int signum) ++{ ++ return 0; ++} ++ ++void __aeabi_unwind_cpp_pr0(void) ++{ ++}; ++ ++void __aeabi_unwind_cpp_pr1(void) ++{ ++}; +diff -ruN --exclude='*~' x-loader-1.5.1.orig/lib/Makefile x-loader-1.5.1/lib/Makefile +--- x-loader-1.5.1.orig/lib/Makefile 2011-11-18 20:36:07.241514851 +0200 ++++ x-loader-1.5.1/lib/Makefile 2011-11-18 20:37:01.505012182 +0200 +@@ -29,7 +29,7 @@ + + SOBJS = _udivsi3.o _umodsi3.o + +-COBJS = board.o ecc.o printf.o div0.o ++COBJS = board.o ecc.o printf.o div0.o eabi_compat.o + + SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) + OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) ++++++ x-loader-1.5.1-enable-debug.patch (new) --- x-loader-1.5.1-enable-debug.patch +++ x-loader-1.5.1-enable-debug.patch @@ -0,0 +1,11 @@ +--- x-loader-1.5.1.orig/config.mk 2011-11-18 20:36:07.243514833 +0200 ++++ x-loader-1.5.1/config.mk 2011-11-19 11:19:44.153539367 +0200 +@@ -121,7 +121,7 @@ + RANLIB = $(CROSS_COMPILE)RANLIB + + RELFLAGS= $(PLATFORM_RELFLAGS) +-DBGFLAGS= -g # -DDEBUG ++DBGFLAGS= -g -DDEBUG + OPTFLAGS= -Os #-fomit-frame-pointer + ifndef LDSCRIPT + #LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/x-load.lds.debug ++++++ x-loader-1.5.1.tar.bz2 (new) ++++++ x-loader-omap4panda.yaml (new) --- x-loader-omap4panda.yaml +++ x-loader-omap4panda.yaml @@ -0,0 +1,35 @@ +Name: x-loader-omap4panda +Summary: The x-loader firmware for the %{TARGET_BOARD} %{TARGET_CPU} platform +Version: 1.5.1 +Release: 1 +Group: System/Boot +License: GPL +URL: http://gitorious.org/x-loader/x-loader +Sources: + - "x-loader-%{version}.tar.bz2" +Patches: + - 0001-igep00x0-beagle-and-omap3evm-fixing-bug-at-prcm_init.patch + - 0002-Fix-warning-in-lib-board.c.patch + - 0003-Fix-warning-in-include-asm-arch-i2c.h.patch + - 0004-Fix-warning-in-cpu-omap3-mmc.c.patch + - x-loader-1.5.1-compile.patch + - x-loader-1.5.1-eabi-compat.patch + - x-loader-1.5.1-enable-debug.patch +Description: | + X-Loader is 2nd stage loader loaded by OMAP BootRom to start 3rd stage tool like + U-Boot. + This package contains the firmware for the %{TARGET_BOARD} %{TARGET_CPU} platform. + +Configure: none +Builder: none +ExclusiveArch: "%{arm}" +SubPackages: + - Name: doc + Summary: Documentation for the x-loader Firmware + Group: System/Boot Documentation + Description: | + X-Loader is 2nd stage loader loaded by OMAP BootRom to start 3rd stage tool like + U-Boot. + This package contains documentation for x-loader firmware + +
