I have made the following changes intended for : CE:Adaptation:N900 / bcm-bt-firmware CE:Adaptation:N900 / bme-rx-51-bin CE:Adaptation:N900 / contextkit-maemo-battery-rx51-bin CE:Adaptation:N900 / i2c-tools CE:Adaptation:N900 / libcal-rx-51-bin CE:Adaptation:N900 / liblocation-headers CE:Adaptation:N900 / libmlocknice CE:Adaptation:N900 / libppu-bin CE:Adaptation:N900 / libwl1251-bin CE:Adaptation:N900 / location-adaptation-rx-51 CE:Adaptation:N900 / nokia-usb-networking CE:Adaptation:N900 / sysinfod-rx51 CE:Adaptation:N900 / ti-wl1251-firmware CE:Adaptation:N900 / wl1251-cal-bin
Please review and accept or decline. BOSS has already run some checks on this request. See the "Messages from BOSS" section below. https://build.pub.meego.com//request/show/7640 Thank You, Marko Saukko [This message was auto-generated] --- Request # 7640: Messages from BOSS: WARNING check_package_is_complete_sources (bme-rx-51-bin) failed: No dsc file found Extra source files: bme-rx-51-bin-0.8.55-armv7hl.tar.bz2, bme-rx-51-bin-0.8.55-armv7l.tar.bz2, libbmeipc-bin-0.8.55-armv7hl.tar.bz2, libbmeipc-bin-0.8.55-armv7l.tar.bz2. Missing source files: libbmeipc-bin-0.8.55-x86_64.tar.bz2, bme-rx-51-bin-0.8.55-x86_64.tar.bz2 WARNING check_package_is_complete_sources (contextkit-maemo-battery-rx51-bin) failed: No dsc file found Extra source files: contextkit-maemo-battery-rx51-bin-0.7.14-armv7hl.tar.bz2, contextkit-maemo-battery-rx51-bin-0.7.14-armv7l.tar.bz2. Missing source files: contextkit-maemo-battery-rx51-bin-0.7.14-x86_64.tar.bz2 WARNING check_package_is_complete_sources (libcal-rx-51-bin) failed: No dsc file found Extra source files: libcal-rx-51-bin-0.2.5-armv7hl.tar.bz2, libcal-rx-51-bin-0.2.5-armv7l.tar.bz2. Missing source files: libcal-rx-51-bin-0.2.5-x86_64.tar.bz2 WARNING check_package_is_complete_sources (libppu-bin) failed: No dsc file found Extra source files: libppu-bin-0.1-armv7hl.tar.bz2, libppu-bin-0.1-armv7l.tar.bz2. Missing source files: libppu-bin-0.1-x86_64.tar.bz2 WARNING check_package_is_complete_sources (libwl1251-bin) failed: No dsc file found Extra source files: libwl1251-bin-0.14-armv7hl.tar.bz2, libwl1251-bin-0.14-armv7l.tar.bz2. Missing source files: libwl1251-bin-0.14-x86_64.tar.bz2 WARNING check_package_is_complete_sources (location-adaptation-rx-51) failed: No dsc file found Extra source files: libisi-bin-1.4.2-1-armv7hl.tar.bz2, liblas-bin-1.0.2-1-armv7hl.tar.bz2, liblocation-bin-0.102-2-armv7hl.tar.bz2, location-daemon-bin-0.98-4-armv7hl.tar.bz2, location-proxy-bin-0.100-4-armv7hl.tar.bz2, location-settings-default-bin-0.2-2-noarch.tar.bz2. Missing source files: liblocation-bin-%{_liblocation_version}-x86_64.tar.bz2, liblas-bin-%{_liblas_version}-x86_64.tar.bz2, location-daemon-bin-%{_location_daemon_version}-x86_64.tar.bz2, libisi-bin-%{_libisi_version}-x86_64.tar.bz2, location-settings-default-bin-%{_location_settings_default_version}-noarch.tar.bz2, location-proxy-bin-%{_location_proxy_version}-x86_64.tar.bz2 WARNING check_package_is_complete_sources (sysinfod-rx51) failed: No dsc file found Extra source files: libsysinfo-bin-0~20100226.1-armv7hl.tar.bz2, libsysinfo-bin-0~20100226.1-armv7l.tar.bz2, sysinfod-bin-0~20100226.1-armv7hl.tar.bz2, sysinfod-bin-0~20100226.1-armv7l.tar.bz2, sysinfod-common-bin-0~20100226.1-armv7hl.tar.bz2, sysinfod-common-bin-0~20100226.1-armv7l.tar.bz2, sysinfod-tool-bin-0~20100226.1-armv7hl.tar.bz2, sysinfod-tool-bin-0~20100226.1-armv7l.tar.bz2. Missing source files: sysinfod-bin-0~20100226.1-x86_64.tar.bz2, libsysinfo-bin-0~20100226.1-x86_64.tar.bz2, sysinfod-tool-bin-0~20100226.1-x86_64.tar.bz2, sysinfod-common-bin-0~20100226.1-x86_64.tar.bz2 WARNING check_package_is_complete_sources (wl1251-cal-bin) failed: No dsc file found Extra source files: wl1251-cal-bin-0.18-armv7hl.tar.bz2, wl1251-cal-bin-0.18-armv7l.tar.bz2. Missing source files: wl1251-cal-bin-0.18-x86_64.tar.bz2 State: review at 2013-01-10T17:40:34 by bossbot Reviews: accepted by bossbot : Prechecks succeeded. new for CE-maintainers : Please replace this text with a review and approve/reject the review (not the SR). BOSS will take care of the rest Changes: submit: home:sage:branches:CE:Adaptation:N900 / bcm-bt-firmware -> CE:Adaptation:N900 / bcm-bt-firmware changes files: -------------- --- bcm-bt-firmware.changes +++ bcm-bt-firmware.changes @@ -0,0 +1,3 @@ +* Thu Jan 10 2013 Marko Saukko <[email protected]> - 0.21rc3 +- Updated packaging. + spec files: ----------- --- bcm-bt-firmware.spec +++ bcm-bt-firmware.spec @@ -1,11 +1,13 @@ # # Do NOT Edit the Auto-generated Part! -# Generated by: spectacle version 0.20 +# Generated by: spectacle version 0.25 # + +Name: bcm-bt-firmware + # >> macros # << macros -Name: bcm-bt-firmware Summary: Firmware for the BCM BT chip Version: 0.21rc3 Release: 0 @@ -15,14 +17,12 @@ Source0: %{name}-%{version}.tar.bz2 Source100: bcm-bt-firmware.yaml - %description Firmware image for the BCM bluetooth chip. Firmware image is needed to boot up bluetooth chip that is found in Nokia Internet Tablets. - %prep %setup -q -n %{name}-%{version} @@ -38,6 +38,7 @@ # >> build post # << build post + %install rm -rf %{buildroot} # >> install pre @@ -48,15 +49,9 @@ # << install post - - - - %files %defattr(-,root,root,-) # >> files %doc copyright /lib/firmware/bcmfw.bin # << files - - other changes: -------------- submit: home:sage:branches:CE:Adaptation:N900 / bme-rx-51-bin -> CE:Adaptation:N900 / bme-rx-51-bin changes files: -------------- --- bme-rx-51-bin.changes +++ bme-rx-51-bin.changes @@ -0,0 +1,3 @@ +* Thu Jan 10 2013 Marko Saukko <[email protected]> - 0.8.55 +- Updated packaging. + spec files: ----------- --- bme-rx-51-bin.spec +++ bme-rx-51-bin.spec @@ -1,12 +1,14 @@ # # Do NOT Edit the Auto-generated Part! -# Generated by: spectacle version 0.23 +# Generated by: spectacle version 0.25 # + +Name: bme-rx-51-bin + # >> macros %define debug_package %{nil} # << macros -Name: bme-rx-51-bin Summary: BME binary Version: 0.8.55 Release: 0 @@ -28,12 +30,10 @@ Provides: bme Provides: bme-rx-51 - %description BME (Battery Management Entity) binary for Nokia N900 - %package -n libbmeipc-bin Summary: Shared library for communication with Battery Management Entity Group: System/Libraries @@ -62,6 +62,7 @@ # >> build post # << build post + %install rm -rf %{buildroot} # >> install pre @@ -79,7 +80,9 @@ %preun +if [ "$1" -eq 0 ]; then systemctl stop %{name}.service +fi %post systemctl daemon-reload @@ -88,8 +91,6 @@ %postun systemctl daemon-reload - - %post -n libbmeipc-bin -p /sbin/ldconfig %postun -n libbmeipc-bin -p /sbin/ldconfig @@ -104,11 +105,9 @@ # >> files # << files - %files -n libbmeipc-bin %defattr(-,root,root,-) %{_libdir}/libbmeipc.so.0 %doc license.txt # >> files libbmeipc-bin # << files libbmeipc-bin - other changes: -------------- submit: home:sage:branches:CE:Adaptation:N900 / contextkit-maemo-battery-rx51-bin -> CE:Adaptation:N900 / contextkit-maemo-battery-rx51-bin changes files: -------------- --- contextkit-maemo-battery-rx51-bin.changes +++ contextkit-maemo-battery-rx51-bin.changes @@ -0,0 +1,3 @@ +* Thu Jan 10 2013 Marko Saukko <[email protected]> - 0.7.14 +- Updated packaging. + new: ---- boss.conf spec files: ----------- --- contextkit-maemo-battery-rx51-bin.spec +++ contextkit-maemo-battery-rx51-bin.spec @@ -1,12 +1,14 @@ # # Do NOT Edit the Auto-generated Part! -# Generated by: spectacle version 0.23 +# Generated by: spectacle version 0.25 # + +Name: contextkit-maemo-battery-rx51-bin + # >> macros %define debug_package %{nil} # << macros -Name: contextkit-maemo-battery-rx51-bin Summary: ContextKit BatteryPlugin for MeeGo N900 Version: 0.7.14 Release: 0 @@ -16,10 +18,10 @@ Source0: %{name}-%{version}-%{_target_cpu}.tar.bz2 Source1: contextkit-maemo-battery-rx51-%{version}.tar.bz2 Source2: includepath-fix.patch +Source3: boss.conf Source100: contextkit-maemo-battery-rx51-bin.yaml Requires: bme-rx-51 - %description This is a ContextKit battery-plugin for the Nokia N900. A library for reading battery data and providing it to the application layer. @@ -27,7 +29,6 @@ - %prep %setup -q -n %{name}-%{version}-%{_target_cpu} @@ -42,6 +43,7 @@ # >> build post # << build post + %install rm -rf %{buildroot} # >> install pre @@ -53,15 +55,9 @@ # << install post - - - - %files %defattr(-,root,root,-) # >> files %{_libdir}/contextkit/subscriber-plugins/libbattery-rx51.so %{_datadir}/contextkit/providers/battery.context # << files - - other changes: -------------- ++++++ boss.conf (new) --- boss.conf +++ boss.conf @@ -0,0 +1,2 @@ +[checks] +check_package_is_complete_sources = warn ++++++ contextkit-maemo-battery-rx51-bin.yaml --- contextkit-maemo-battery-rx51-bin.yaml +++ contextkit-maemo-battery-rx51-bin.yaml @@ -8,6 +8,7 @@ - "%{name}-%{version}-%{_target_cpu}.tar.bz2" - "contextkit-maemo-battery-rx51-%{version}.tar.bz2" - "includepath-fix.patch" + - boss.conf Description: | This is a ContextKit battery-plugin for the Nokia N900. A library for reading battery data and providing it to the application layer. submit: home:sage:branches:CE:Adaptation:N900 / i2c-tools -> CE:Adaptation:N900 / i2c-tools changes files: -------------- --- i2c-tools.changes +++ i2c-tools.changes @@ -0,0 +1,3 @@ +* Thu Jan 10 2013 Marko Saukko <[email protected]> - 3.0.3 +- Updated packaging. + spec files: ----------- --- i2c-tools.spec +++ i2c-tools.spec @@ -1,11 +1,13 @@ # # Do NOT Edit the Auto-generated Part! -# Generated by: spectacle version 0.23 +# Generated by: spectacle version 0.25 # + +Name: i2c-tools + # >> macros # << macros -Name: i2c-tools Summary: Heterogeneous set of I2C tools for Linux Version: 3.0.3 Release: 1 @@ -14,14 +16,12 @@ Source0: http://dl.lm-sensors.org/i2c-tools/releases/%{name}-%{version}.tar.bz2 Source100: i2c-tools.yaml - %description This package contains a heterogeneous set of I2C tools for Linux: a bus probing tool, a chip dumper, register-level access helpers, EEPROM decoding scripts, and more. - %package -n libi2c-devel Summary: Userspace I2C programming library development files Group: System/Libraries @@ -49,6 +49,7 @@ # >> build post make %{?jobs:-j%jobs} # << build post + %install rm -rf %{buildroot} # >> install pre @@ -63,13 +64,6 @@ # << install post - - - - - - - %files %defattr(-,root,root,-) # >> files @@ -90,11 +84,9 @@ %{_mandir}/man8/i2cset.8.gz # << files - %files -n libi2c-devel %defattr(-,root,root,-) # >> files libi2c-devel %doc COPYING %{_includedir}/libi2c/i2c-dev.h # << files libi2c-devel - other changes: -------------- submit: home:sage:branches:CE:Adaptation:N900 / libcal-rx-51-bin -> CE:Adaptation:N900 / libcal-rx-51-bin changes files: -------------- --- libcal-rx-51-bin.changes +++ libcal-rx-51-bin.changes @@ -0,0 +1,3 @@ +* Thu Jan 10 2013 Marko Saukko <[email protected]> - 0.2.5 +- Updated packaging. + new: ---- boss.conf spec files: ----------- --- libcal-rx-51-bin.spec +++ libcal-rx-51-bin.spec @@ -1,12 +1,14 @@ # # Do NOT Edit the Auto-generated Part! -# Generated by: spectacle version 0.22 +# Generated by: spectacle version 0.25 # + +Name: libcal-rx-51-bin + # >> macros %define debug_package %{nil} # << macros -Name: libcal-rx-51-bin Summary: Libcal binary Version: 0.2.5 Release: 0 @@ -15,18 +17,17 @@ ExclusiveArch: %arm Source0: %{name}-%{version}-%{_target_cpu}.tar.bz2 Source1: license.txt +Source2: boss.conf Source100: libcal-rx-51-bin.yaml Requires(post): /sbin/ldconfig Requires(postun): /sbin/ldconfig Provides: libcal - %description Libcal binary for Nokia N900. - %prep %setup -q -n %{name}-%{version}-%{_target_cpu} @@ -43,6 +44,7 @@ # >> build post # << build post + %install rm -rf %{buildroot} # >> install pre @@ -58,12 +60,10 @@ # << install post - %post -p /sbin/ldconfig %postun -p /sbin/ldconfig - %files %defattr(-,root,root,-) %exclude %{_libdir}/documentation.list @@ -72,5 +72,3 @@ %doc license.txt # >> files # << files - - other changes: -------------- ++++++ boss.conf (new) --- boss.conf +++ boss.conf @@ -0,0 +1,3 @@ +[checks] +check_package_is_complete = warn +check_package_is_complete_sources = warn ++++++ libcal-rx-51-bin.yaml --- libcal-rx-51-bin.yaml +++ libcal-rx-51-bin.yaml @@ -12,6 +12,7 @@ Sources: - "%{name}-%{version}-%{_target_cpu}.tar.bz2" - "license.txt" + - boss.conf SetupOptions: -q -n %{name}-%{version}-%{_target_cpu} Configure: none submit: home:sage:branches:CE:Adaptation:N900 / liblocation-headers -> CE:Adaptation:N900 / liblocation-headers changes files: -------------- --- liblocation-headers.changes +++ liblocation-headers.changes @@ -0,0 +1,3 @@ +* Thu Jan 10 2013 Marko Saukko <[email protected]> - 0.102 +- Updated packaging. + spec files: ----------- --- liblocation-headers.spec +++ liblocation-headers.spec @@ -1,11 +1,13 @@ # # Do NOT Edit the Auto-generated Part! -# Generated by: spectacle version 0.23 +# Generated by: spectacle version 0.25 # + +Name: liblocation-headers + # >> macros # << macros -Name: liblocation-headers Summary: Liblocation development headers Version: 0.102 Release: 0 @@ -17,13 +19,11 @@ Source2: copyright.txt Source100: liblocation-headers.yaml - %description Development headers for (closed-source) liblocation. Liblocation is a utility library for performing GPS related functions on the Nokia N900 device. - %prep %setup -q -n %{name}-%{version} @@ -41,6 +41,7 @@ # >> build post # << build post + %install rm -rf %{buildroot} # >> install pre @@ -52,10 +53,6 @@ # << install post - - - - %files %defattr(-,root,root,-) # >> files @@ -64,5 +61,3 @@ %{_libdir}/pkgconfig/liblocation* %{_includedir}/location/* # << files - - other changes: -------------- submit: home:sage:branches:CE:Adaptation:N900 / libmlocknice -> CE:Adaptation:N900 / libmlocknice changes files: -------------- --- libmlocknice.changes +++ libmlocknice.changes @@ -0,0 +1,3 @@ +* Thu Jan 10 2013 Marko Saukko <[email protected]> - 0.1 +- Updated packaging. + old: ---- Makefile spec files: ----------- --- libmlocknice.spec +++ libmlocknice.spec @@ -1,11 +1,13 @@ # # Do NOT Edit the Auto-generated Part! -# Generated by: spectacle version 0.23 +# Generated by: spectacle version 0.25 # + +Name: libmlocknice + # >> macros # << macros -Name: libmlocknice Summary: Memory Locking library for maemo applications - shared library Version: 0.1 Release: 0 @@ -16,11 +18,9 @@ Requires(post): /sbin/ldconfig Requires(postun): /sbin/ldconfig - %description Memory Locking library for maemo applications - shared library. - %package devel Summary: Memory Locking library for maemo applications - development files Group: Development/Libraries @@ -45,6 +45,7 @@ # >> build post # << build post + %install rm -rf %{buildroot} # >> install pre @@ -55,15 +56,10 @@ # << install post - %post -p /sbin/ldconfig %postun -p /sbin/ldconfig - - - - %files %defattr(-,root,root,-) # >> files @@ -71,7 +67,6 @@ %{_libdir}/*.so.* # << files - %files devel %defattr(-,root,root,-) # >> files devel @@ -79,4 +74,3 @@ %{_includedir}/* %{_libdir}/*.so # << files devel - other changes: -------------- ++++++ deleted files: --- Makefile submit: home:sage:branches:CE:Adaptation:N900 / libppu-bin -> CE:Adaptation:N900 / libppu-bin changes files: -------------- --- libppu-bin.changes +++ libppu-bin.changes @@ -0,0 +1,3 @@ +* Thu Jan 10 2013 Marko Saukko <[email protected]> - 0.1 +- Updated packaging. + new: ---- boss.conf spec files: ----------- --- libppu-bin.spec +++ libppu-bin.spec @@ -1,12 +1,14 @@ # # Do NOT Edit the Auto-generated Part! -# Generated by: spectacle version 0.22git +# Generated by: spectacle version 0.25 # + +Name: libppu-bin + # >> macros %define debug_package %{nil} # << macros -Name: libppu-bin Summary: Library to access ppu data Version: 0.1 Release: 0 @@ -15,16 +17,15 @@ ExclusiveArch: %arm Source0: %{name}-%{version}-%{_target_cpu}.tar.bz2 Source1: license.txt +Source2: boss.conf Source100: libppu-bin.yaml Requires(post): /sbin/ldconfig Requires(postun): /sbin/ldconfig - %description Library to read pp_data from calibration area. - %prep %setup -q -n %{name}-%{version}-%{_target_cpu} @@ -41,6 +42,7 @@ # >> build post # << build post + %install rm -rf %{buildroot} # >> install pre @@ -52,17 +54,13 @@ # << install post - %post -p /sbin/ldconfig %postun -p /sbin/ldconfig - %files %defattr(-,root,root,-) # >> files %{_libdir}/*.so.* %doc license.txt # << files - - other changes: -------------- ++++++ boss.conf (new) --- boss.conf +++ boss.conf @@ -0,0 +1,4 @@ +[checks] +check_package_is_complete = warn +check_package_is_complete_sources = warn + ++++++ libppu-bin.yaml --- libppu-bin.yaml +++ libppu-bin.yaml @@ -7,6 +7,8 @@ Sources: - "%{name}-%{version}-%{_target_cpu}.tar.bz2" - "license.txt" + - boss.conf + Description: Library to read pp_data from calibration area. ExclusiveArch: "%arm" submit: home:sage:branches:CE:Adaptation:N900 / libwl1251-bin -> CE:Adaptation:N900 / libwl1251-bin changes files: -------------- --- libwl1251-bin.changes +++ libwl1251-bin.changes @@ -0,0 +1,3 @@ +* Thu Jan 10 2013 Marko Saukko <[email protected]> - 0.14 +- Updated packaging. + new: ---- boss.conf spec files: ----------- --- libwl1251-bin.spec +++ libwl1251-bin.spec @@ -1,12 +1,14 @@ # # Do NOT Edit the Auto-generated Part! -# Generated by: spectacle version 0.23 +# Generated by: spectacle version 0.25 # + +Name: libwl1251-bin + # >> macros %define debug_package %{nil} # << macros -Name: libwl1251-bin Summary: Shared library for wl1251 Version: 0.14 Release: 0 @@ -15,16 +17,15 @@ ExclusiveArch: %arm Source0: %{name}-%{version}-%{_target_cpu}.tar.bz2 Source1: license.txt +Source2: boss.conf Source100: libwl1251-bin.yaml Requires(post): /sbin/ldconfig Requires(postun): /sbin/ldconfig - %description Libwl1251 is the user space library for TI wl1251 WLAN chipset. - %prep %setup -q -n %{name}-%{version}-%{_target_cpu} @@ -41,6 +42,7 @@ # >> build post # << build post + %install rm -rf %{buildroot} # >> install pre @@ -52,17 +54,13 @@ # << install post - %post -p /sbin/ldconfig %postun -p /sbin/ldconfig - %files %defattr(-,root,root,-) # >> files %{_libdir}/*.so.* %doc license.txt # << files - - other changes: -------------- ++++++ boss.conf (new) --- boss.conf +++ boss.conf @@ -0,0 +1,3 @@ +[checks] +check_package_is_complete = warn +check_package_is_complete_sources = warn ++++++ libwl1251-bin.yaml --- libwl1251-bin.yaml +++ libwl1251-bin.yaml @@ -7,6 +7,8 @@ Sources: - "%{name}-%{version}-%{_target_cpu}.tar.bz2" - "license.txt" + - boss.conf + Description: Libwl1251 is the user space library for TI wl1251 WLAN chipset. ExclusiveArch: "%arm" submit: home:sage:branches:CE:Adaptation:N900 / location-adaptation-rx-51 -> CE:Adaptation:N900 / location-adaptation-rx-51 changes files: -------------- --- location-adaptation-rx-51.changes +++ location-adaptation-rx-51.changes @@ -0,0 +1,3 @@ +* Thu Jan 10 2013 Marko Saukko <[email protected]> - 0.2 +- Updated packaging. + new: ---- boss.conf spec files: ----------- --- location-adaptation-rx-51.spec +++ location-adaptation-rx-51.spec @@ -1,17 +1,13 @@ # # Do NOT Edit the Auto-generated Part! -# Generated by: spectacle version 0.23 +# Generated by: spectacle version 0.25 # + +Name: location-adaptation-rx-51 + # >> macros -%define _libisi_version 1.4.2-1 -%define _liblas_version 1.0.2-1 -%define _liblocation_version 0.102-2 -%define _location_daemon_version 0.98-4 -%define _location_proxy_version 0.100-4 -%define _location_settings_default_version 0.2-2 # << macros -Name: location-adaptation-rx-51 Summary: Location adaptation SW for N900 Version: 0.2 Release: 0 @@ -25,19 +21,16 @@ Source4: location-proxy-bin-%{_location_proxy_version}-%{_target_cpu}.tar.bz2 Source5: location-settings-default-bin-%{_location_settings_default_version}-noarch.tar.bz2 Source6: license.txt +Source7: boss.conf Source100: location-adaptation-rx-51.yaml - %description This package provides the location adaptation software stack (below GeoClue) and QtMobility) for the Nokia N900 Device. - %package -n libisi-bin Summary: ISI library runtime Group: Location/Location Adaptation -Requires(post): /sbin/ldconfig -Requires(postun): /sbin/ldconfig Provides: libisi %description -n libisi-bin @@ -46,8 +39,6 @@ %package -n liblas-bin Summary: Shared library for Location Adaptation Service Group: Location/Location Adaptation -Requires(post): /sbin/ldconfig -Requires(postun): /sbin/ldconfig Provides: liblas %description -n liblas-bin @@ -58,8 +49,6 @@ Group: Location/Location Adaptation Requires: location-proxy Requires: location-daemon -Requires(post): /sbin/ldconfig -Requires(postun): /sbin/ldconfig Provides: liblocation %description -n liblocation-bin @@ -87,9 +76,6 @@ %package -n location-settings-default Summary: Default settings for location adaptation on Nokia N900 Group: Location/Location Adaptation -Requires(pre): GConf2 -Requires(preun): GConf2 -Requires(post): GConf2 %description -n location-settings-default Gconf default settings for location adaptation on Nokia N900. @@ -99,15 +85,6 @@ # No setup # >> setup -%setup -c -%setup -T -D -a 1 -%setup -T -D -a 2 -%setup -T -D -a 3 -%setup -T -D -a 4 -%setup -T -D -a 5 - -# Copy license.txt -cp %{SOURCE6} . # << setup %build @@ -118,118 +95,42 @@ # >> build post # << build post + %install rm -rf %{buildroot} # >> install pre # << install pre # >> install post -install -d %{buildroot} -cp -ax libisi-bin-%{_libisi_version}-%{_target_cpu}/* %{buildroot} -cp -ax liblas-bin-%{_liblas_version}-%{_target_cpu}/* %{buildroot} -cp -ax liblocation-bin-%{_liblocation_version}-%{_target_cpu}/* %{buildroot} -cp -ax location-daemon-bin-%{_location_daemon_version}-%{_target_cpu}/* %{buildroot} -cp -ax location-proxy-bin-%{_location_proxy_version}-%{_target_cpu}/* %{buildroot} -cp -ax location-settings-default-bin-%{_location_settings_default_version}-noarch/* %{buildroot} - -# Remove license.txt's - will be added later in %files section -find %{buildroot} -name 'license.txt' | xargs rm # << install post - - - - - -%post -n libisi-bin -p /sbin/ldconfig - -%postun -n libisi-bin -p /sbin/ldconfig - - -%post -n liblas-bin -p /sbin/ldconfig - -%postun -n liblas-bin -p /sbin/ldconfig - - -%post -n liblocation-bin -p /sbin/ldconfig - -%postun -n liblocation-bin -p /sbin/ldconfig - - - - - - -%pre -n location-settings-default -if [ "$1" -gt 1 ]; then - export GCONF_CONFIG_SOURCE=`gconftool-2 --get-default-source` - gconftool-2 --makefile-uninstall-rule \ - %{_sysconfdir}/gconf/schemas/location.schemas \ - > /dev/null || : -fi - -%preun -n location-settings-default -if [ "$1" -eq 0 ]; then - export GCONF_CONFIG_SOURCE=`gconftool-2 --get-default-source` - gconftool-2 --makefile-uninstall-rule \ - %{_sysconfdir}/gconf/schemas/location.schemas \ - > /dev/null || : -fi - -%post -n location-settings-default -export GCONF_CONFIG_SOURCE=`gconftool-2 --get-default-source` -gconftool-2 --makefile-install-rule \ - %{_sysconfdir}/gconf/schemas/location.schemas > /dev/null || : - - - - %files -n libisi-bin %defattr(-,root,root,-) # >> files libisi-bin -%doc license.txt -%{_libdir}/libisi*.so* # << files libisi-bin %files -n liblas-bin %defattr(-,root,root,-) # >> files liblas-bin -%doc license.txt -%{_libdir}/liblas*.so* # << files liblas-bin %files -n liblocation-bin %defattr(-,root,root,-) # >> files liblocation-bin -%doc license.txt -%{_libdir}/liblocation*.so* # << files liblocation-bin %files -n location-daemon-bin %defattr(-,root,root,-) # >> files location-daemon-bin -%doc license.txt -%config %{_sysconfdir}/dbus-1/system.d/com.nokia.Location.conf -%{_libexecdir}/location-daemon -%{_datadir}/dbus-1/system-services/com.nokia.Location.service # << files location-daemon-bin %files -n location-proxy-bin %defattr(-,root,root,-) # >> files location-proxy-bin -%doc license.txt -%config %{_sysconfdir}/xdg/autostart/location-proxy.desktop -%config %{_sysconfdir}/dbus-1/system.d/com.nokia.Location.Proxy.conf -%{_bindir}/location-proxy -%{_datadir}/sms-handlers/supl_mt_sms.handler -%{_datadir}/dbus-1/system-services/com.nokia.Location-proxy.service # << files location-proxy-bin %files -n location-settings-default %defattr(-,root,root,-) # >> files location-settings-default -%doc license.txt -%config %{_sysconfdir}/gconf/schemas/location.schemas # << files location-settings-default - other changes: -------------- ++++++ boss.conf (new) --- boss.conf +++ boss.conf @@ -0,0 +1,3 @@ +[checks] +check_package_is_complete = warn +check_package_is_complete_sources = warn ++++++ location-adaptation-rx-51.yaml --- location-adaptation-rx-51.yaml +++ location-adaptation-rx-51.yaml @@ -16,6 +16,7 @@ - "location-proxy-bin-%{_location_proxy_version}-%{_target_cpu}.tar.bz2" - "location-settings-default-bin-%{_location_settings_default_version}-noarch.tar.bz2" - "license.txt" + - boss.conf NoSetup: yes Configure: none submit: home:sage:branches:CE:Adaptation:N900 / nokia-usb-networking -> CE:Adaptation:N900 / nokia-usb-networking changes files: -------------- --- nokia-usb-networking.changes +++ nokia-usb-networking.changes @@ -0,0 +1,3 @@ +* Thu Jan 10 2013 Marko Saukko <[email protected]> - 2.0 +- Updated packaging. + old: ---- boss.conf spec files: ----------- --- nokia-usb-networking.spec +++ nokia-usb-networking.spec @@ -1,11 +1,13 @@ # # Do NOT Edit the Auto-generated Part! -# Generated by: spectacle version 0.23 +# Generated by: spectacle version 0.25 # + +Name: nokia-usb-networking + # >> macros # << macros -Name: nokia-usb-networking Summary: Provides init script for USB networking for Nokia devices Version: 2.0 Release: 0 @@ -17,18 +19,16 @@ Source1: %{name}.service Source100: nokia-usb-networking.yaml Requires: net-tools -Requires: module-init-tools +Requires: kmod >= 9 Requires: systemd Requires(preun): systemd Requires(post): systemd Requires(postun): systemd - %description Provides init script for USB networking for Nokia devices. - %prep # No setup @@ -43,6 +43,7 @@ # >> build post # << build post + %install rm -rf %{buildroot} # >> install pre @@ -57,7 +58,9 @@ %preun +if [ "$1" -eq 0 ]; then systemctl stop %{name}.service +fi %post systemctl daemon-reload @@ -66,7 +69,6 @@ %postun systemctl daemon-reload - %files %defattr(-,root,root,-) # >> files @@ -75,5 +77,3 @@ /lib/systemd/system/%{name}.service /lib/systemd/system/sysinit.target.wants/%{name}.service # << files - - other changes: -------------- ++++++ nokia-usb-networking.yaml --- nokia-usb-networking.yaml +++ nokia-usb-networking.yaml @@ -12,9 +12,10 @@ Requires: - net-tools - - module-init-tools + - kmod >= 9 NoSetup: yes Configure: none Builder: none -BuildArch: noarch \ No newline at end of file +BuildArch: noarch + ++++++ deleted files: --- boss.conf submit: home:sage:branches:CE:Adaptation:N900 / sysinfod-rx51 -> CE:Adaptation:N900 / sysinfod-rx51 changes files: -------------- --- sysinfod-rx51.changes +++ sysinfod-rx51.changes @@ -0,0 +1,3 @@ +* Thu Jan 10 2013 Marko Saukko <[email protected]> - 0~20100226.1 +- Updated packaging. + spec files: ----------- --- sysinfod-rx51.spec +++ sysinfod-rx51.spec @@ -1,12 +1,14 @@ # # Do NOT Edit the Auto-generated Part! -# Generated by: spectacle version 0.23 +# Generated by: spectacle version 0.25 # + +Name: sysinfod-rx51 + # >> macros %define debug_package %{nil} # << macros -Name: sysinfod-rx51 Summary: System information daemon binaries Version: 0~20100226.1 Release: 0 @@ -24,11 +26,9 @@ Source8: boss.conf Source100: sysinfod-rx51.yaml - %description D-BUS service which provides system information. - %package bin Summary: System information daemon binaries Group: System/Startup Services @@ -100,6 +100,7 @@ # >> build post # << build post + %install rm -rf %{buildroot} # >> install pre @@ -118,29 +119,10 @@ # << install post - - - - - - - - - - - - - - %post -n libsysinfo-rx51-bin -p /sbin/ldconfig %postun -n libsysinfo-rx51-bin -p /sbin/ldconfig - - - - - %files bin %defattr(-,root,root,-) %doc license.txt @@ -178,4 +160,3 @@ %config %{_sysconfdir}/udev/rules.d/sysinfod-rx51.rules # >> files udev-rules # << files udev-rules - other changes: -------------- ++++++ boss.conf --- boss.conf +++ boss.conf @@ -1,2 +1,3 @@ [checks] check_package_is_complete = warn +check_package_is_complete_sources = warn submit: home:sage:branches:CE:Adaptation:N900 / ti-wl1251-firmware -> CE:Adaptation:N900 / ti-wl1251-firmware changes files: -------------- --- ti-wl1251-firmware.changes +++ ti-wl1251-firmware.changes @@ -0,0 +1,3 @@ +* Thu Jan 10 2013 Marko Saukko <[email protected]> - 0.4 +- Updated packaging. + spec files: ----------- --- ti-wl1251-firmware.spec +++ ti-wl1251-firmware.spec @@ -1,11 +1,13 @@ # # Do NOT Edit the Auto-generated Part! -# Generated by: spectacle version 0.20git +# Generated by: spectacle version 0.25 # + +Name: ti-wl1251-firmware + # >> macros # << macros -Name: ti-wl1251-firmware Summary: Firmware for TI wl1251 WLAN chip Version: 0.4 Release: 0 @@ -16,12 +18,10 @@ Source2: license.doc Source100: ti-wl1251-firmware.yaml - %description This is the firmware for the TI wl1251 WLAN chip. - %prep %setup -q -n %{name}-%{version} @@ -39,6 +39,7 @@ # >> build post # << build post + %install rm -rf %{buildroot} # >> install pre @@ -49,10 +50,6 @@ # << install post - - - - %files %defattr(-,root,root,-) # >> files @@ -60,5 +57,3 @@ /lib/firmware/wl1251-fw.bin /lib/firmware/wl1251-nvs.bin # << files - - other changes: -------------- submit: home:sage:branches:CE:Adaptation:N900 / wl1251-cal-bin -> CE:Adaptation:N900 / wl1251-cal-bin changes files: -------------- --- wl1251-cal-bin.changes +++ wl1251-cal-bin.changes @@ -0,0 +1,3 @@ +* Thu Jan 10 2013 Marko Saukko <[email protected]> - 0.18 +- Updated packaging. + new: ---- boss.conf spec files: ----------- --- wl1251-cal-bin.spec +++ wl1251-cal-bin.spec @@ -1,12 +1,14 @@ # # Do NOT Edit the Auto-generated Part! -# Generated by: spectacle version 0.23 +# Generated by: spectacle version 0.25 # + +Name: wl1251-cal-bin + # >> macros %define debug_package %{nil} # << macros -Name: wl1251-cal-bin Summary: Calibration data pusher for wl1251 Version: 0.18 Release: 0 @@ -16,18 +18,17 @@ Source0: %{name}-%{version}-%{_target_cpu}.tar.bz2 Source1: license.txt Source2: wl1251-cal.service +Source3: boss.conf Source100: wl1251-cal-bin.yaml Requires: systemd Requires(preun): systemd Requires(post): systemd Requires(postun): systemd - %description This application reads the stored calibration data and pushes it to wl1251. - %prep %setup -q -n %{name}-%{version}-%{_target_cpu} @@ -44,6 +45,7 @@ # >> build post # << build post + %install rm -rf %{buildroot} # >> install pre @@ -60,7 +62,9 @@ %preun +if [ "$1" -eq 0 ]; then systemctl stop wl1251-cal.service +fi %post systemctl daemon-reload @@ -69,7 +73,6 @@ %postun systemctl daemon-reload - %files %defattr(-,root,root,-) # >> files @@ -78,5 +81,3 @@ /%{_lib}/systemd/system/basic.target.wants/wl1251-cal.service %doc license.txt # << files - - other changes: -------------- ++++++ boss.conf (new) --- boss.conf +++ boss.conf @@ -0,0 +1,3 @@ +[checks] +check_package_is_complete = warn +check_package_is_complete_sources = warn ++++++ wl1251-cal-bin.yaml --- wl1251-cal-bin.yaml +++ wl1251-cal-bin.yaml @@ -8,6 +8,8 @@ - "%{name}-%{version}-%{_target_cpu}.tar.bz2" - "license.txt" - "wl1251-cal.service" + - boss.conf + Description: This application reads the stored calibration data and pushes it to wl1251. ExclusiveArch: "%arm"
