Do all of you guys already have B-7971's that you've been waiting to put in a clock? I thought that the B-7971 was pretty much unobtainium these days...
-Adam On Fri, Feb 25, 2011 at 8:33 PM, Lucky <[email protected]> wrote: > It's got my interest for sure > > On 25 Feb, 19:21, MichaelB <[email protected]> wrote: > > To all, > > > > As some of you may know, Carl Ott of this forum has done a wonderful 6 > > digit direct-drive clock design for the B7971. I have been working > > with Carl and another forum member and have had a batch of PCB’s made > > per his gerber files. This has resulted in my building an open-top > > > > > > Note the aluminum fab’d bracket mounting the rotary encoder. This will > > be replaced with a right angle rotary that will mount directly to the > > PCB. Carl plans to do a little more tweaking to the software as well. > > Also there is a fair amount of SMD component soldering involved by the > > user and the kit will be offered without tubes. > > > > Here is a list of the feature set as it stands now. > > > > ==Unique Rotary Encoder User interface > > > > ==Auto Display dimming feature via photo sensor > > > > ==Adjustable DIM and Brightness levels with Adjustable Dimming > > threshold > > > > ==QuickTime Set feature- quickly and easily set current time without > > entering config. mode > > > > ==9 Selectable FONTS > > > > ==Clock spells out the Month and Day of the week, also displays date > > and year > > > > ==Four user selectable colon modes- OFF, ON, BLINK, ALT, or RAILRD > > (railroad) > > > > == TCXO time based > > > > ==Time On/Time Off sleep setting > > > > ==Smooth Digit Cross Fade feature with fade rate adjust. > > > > ==12/24 hour display mode selection > > > > ==Leading Zero Suppression selection > > > > ==Adjustable Pulse width Modulation setting value. > > > > ==Light Value Test Feature to determine optimal dimming point > > > > ==CW/CCW Rotary encoder direction selection > > > > Your feedback is appreciated! > > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To post to this group, send an email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/neonixie-l?hl=en-GB. > > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To post to this group, send an email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB.
