On Mar 21, 4:26 am, koolatron <[email protected]> wrote: > Here's a link to my dropbox, in case you have a need for such a > thing:http://dl.dropbox.com/u/709108/EAGLE/NL-5440.lbr
Small things - the ">NAME" tag should be on tNames and the ">VALUE" tag on tValues (this is important). You haven't connected the left & right decimal points (pins 6 & 11 respectively). Some of your tPlace data overlays the pads and will thus be printed on the copper if you use a silk screen when the boards are made - data that is for documentation but overlays copper and which is thus not wanted on the manufactured board should be on tDocu. You might want to add descriptive text to the package & device and name the SK-185 package variant something meaningful (rather then blank), such as "SK-185" so that you can add other packages such as PCB pins with a different variant name. Pin allocations and other stuff looks good. Nick -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To post to this group, send an email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB.
