In case you make adapters for different dekatrons to the octal socket and eventually make R7 and R10 switchable for higher supply voltages, you can make a dekatron tester with the print. Don't forget to adapt the diodes D1-3 and capacitors C2-4 to the higher voltages. Some suggestions Mike already gave in this [ Re: FS: Shameless Plug Time - Dekatron Spinner Kits ] thread on my question about using a ELESTA EZ10B high speed dekatron. This tube needs a supply voltage of at least 500V. Warning: Remember, 1/4 W resistors are rated for only 200V working voltage, so look for >400V replacements for R 7 and R10-11 !! Also power ratings of some resistors ask for adaptation to 1/2 or 1W types. See further the thread: (Re:) FS: Shameless Plug Time - Dekatron Spinner Kits Have interest in the A108 dekatrons, the datasheet in particular ! eric
_____ From: [email protected] [mailto:[email protected]] On Behalf Of William Lee Sent: donderdag 2 februari 2012 19:34 To: [email protected] Subject: [neonixie-l] A-108 Dekatron circuits? Hi all- Besides the OG-4s I got in for threeneuron's great dekatron spinner kit, I also recently picked up a few A-108s. The extremely small size appealed to me for whatever reason. I've been perusing the VTA entry on them, and see that they count base 5 instead of 10, but was wondering if anyone had any sample circuits for them or feedback on projects that they've used them in. If the Yilane kits were still available, I would definitely grab one of those, but it looks like I'm on my own as far as building a board with these. Any suggestions or comments would be appreciated. Thanks, Dylan -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To view this discussion on the web, visit https://groups.google.com/d/msg/neonixie-l/-/ueoM254w4OMJ. To post to this group, send an email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To post to this group, send an email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB.
