All done! I probably need to polish the software here and there to remove traces of debugging and add a bit more comment so that I can still find out what I was thinking in about 10 years from now. But overall, everything works.
I added the following parameters that the user can change to their own preference: P01 : 12/24hr format [0=24hr, 1=12hr] P02 : Maximum brightness [0=25%, 1=50%, 2=75%, 3=100%] P03 : Brightness [0=constant, 1=ambient, 2=ambient+3dB, 3=ambient+6dB] P04 : Time format [0=hh/mm, 1=hh/mm/ss, 2=hh/mm/ss + 5 seconds real time, 3=hh/mm continuously with 5 second delays] P05 : Rotation speed [0=fast, 1, 2, 3=slow] P06 : Motion sensor disable [0=always, 1=after 2hrs, 2=after 4hrs, 3=never] P07 : Power saving mode [0=sleep, 1=deep sleep] P08 : Tube brightness in low ambient light [0=+0, 1=+2, 2=+4 3=+8] P09 : Motion sensor range [0=6cm, 1, 2, 3=2cm] P10 : Calibration register increment P11 : Calibration register decrement Michel -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To post to this group, send an email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB.
