On 5/28/12 8:02 AM, Jonathan Peakall wrote:
Hi All,
Well, thanks to help from thje list, I figgered out I had the wrong
anode resistor on my NE-2. However, using the right resistor (240k, 200V
input) the lamp is pretty dim.
Are these really supposed to be run at .3mA? I have some NE-2's (I
think) with 16K resistors pre-attached. Even if run at 80V, that would
be way more than .3mA.
Jonathan
www.madlabs.info <http://www.madlabs.info>

The two common neon lamps are NE-2 and NE-2H. The H is for high brightness, which uses high current.

The NE-2 typically runs with a 220K resistor from 110VAC. If it has a 16K resistor, it's probably an NE-2H.

--
David Forbes, Tucson AZ

--
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To post to this group, send an email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/neonixie-l?hl=en-GB.

Reply via email to