- Does it stick on the same pin if you run it both directions? I usually run them backwards (counter clockwise) as they have - mostly been running clockwise. - - If I get a dekatron that is hard to get to run I sometimes use the guide electrodes as the cathode and the true cathode that - is sticking as an anode and let it sit with just enough voltage/current to start the glow for some time, usually not more than - a few minutes, leaving the true anode without any connection.
Sticks in both directions. Same spot. Weird is that it sticks at the higher current, but okay at the lower current. Never tried rigging a "main" cathode as anode. But its novel scheme for "spot cleaning". -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To post to this group, send an email to [email protected]. To unsubscribe from this group, send email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msg/neonixie-l/-/k_LRjRXBZnsJ. For more options, visit https://groups.google.com/groups/opt_out.
