> I think I will change the screws to 2-56 - the 0-80's ARE small. >
I used 2mm spaced connectors due to size constraints. However, I will list the dimensions in metric. The inputs have pullups, so a switch to ground is all that is needed. They are debounced in software. Temperature inputs will work with a MCP9700A, TO92 case. They cost around 30 cents and are accurate The light sensor works with a TEPT4400 light sensor, about 50 cents. I'll update the web page with I/O interface circuits to use with the board. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/adb1ca12-d126-4a40-a292-70bf802aaf51%40googlegroups.com?hl=en-GB. For more options, visit https://groups.google.com/groups/opt_out.
