On 5/23/2013 1:29 PM, M.J.Sangster wrote:
I gave the 0.1" connectors some thought, and here is what I have come up
with:
1. The reason I went with 2mm spacing connectors is to meet the small board
size requested with many features (GPS, 6 digits, analog inputs, etc). The
26 pin 0.1" is too big for this application.
There is a lot of empty space on the board beyond the big capacitor/inductor to
the right of connector 1. I believe that with a bit of sliding around, you could
fit a 0.1" connector there.
I may be wrong, since I can't see the copper tracks. But my board layout
intuition tells me that there is room for a bigger connector.
You would have more work to do to make connector 2 be 0.1", due to that chip
right next to it.
--
David Forbes, Tucson, AZ
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send an email to [email protected].
To view this discussion on the web, visit
https://groups.google.com/d/msgid/neonixie-l/519E7DDE.4010500%40dakotacom.net?hl=en-GB.
For more options, visit https://groups.google.com/groups/opt_out.
