Really nice with >400V output voltage!
 
Regarding isolation, some circuits are easier to build if the different 
high voltages needed are isolated from the low voltages (digital and/or 
analogue) and in the case with Russian Dekatrons like A-201 (Polyatron) it 
is a lot easier to design a circuit with isolated power supplies than those 
that use a common ground.
 
Isolation can of course be made with optocouplers for the other signals but 
in some circumstances the original design used transformers as isolation 
between the different voltage levels to make sure that it was easy to drive 
the Dekatrons/Polyatrons. Right now I am using small Traco switchers to 
isolate the high voltages from the low voltages and also optocouplers in 
some cases in combination with this.
 
There might be other ways of doing this but I am trying to follow the 
original designs to get things to work before I start to experiment with 
other solutions, and in some caes I want to stick to the original designs 
and not use modern components except for the power supplies which I don't 
regard as part of the original circuit (I also want to minimize power usage 
and weight).
 
/Martin

On Tuesday, 13 August 2013 00:26:39 UTC+2, taylorjpt wrote:

> >Will it be possible to get 300V from this power supply without a voltage 
> doubler?
>
> I am designing this one with >400V out without an external circuit.
>
> >...will you make a transformer based power supply with isolated output 
> too?
>
> I don't understand the question about isolation. By using a DC input, 
> mains isolation comes at the expense of lower system efficiency by the 
> decision was made to let someone else deal with UL and focus on the high 
> voltage side.
>
> jt
>

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send an email to [email protected].
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/neonixie-l/a0b31514-3f4c-4a24-9178-007fcec02897%40googlegroups.com?hl=en-GB.
For more options, visit https://groups.google.com/groups/opt_out.


Reply via email to