The new board is built up with the final transformer design: 36V in, 306V out @ 100W, 88% efficiency. Destroyed my old HVPS load bank, building a better one this week end. My epoxy will be in week after next and I can use the casting tooling from the 1329 module. Based on the calculations for the epoxy I should be able to hit about 5C differential, module internal to heatsink mounting face at 100W out. The first potted module will get 6 thermocouples built in to measure the thermal performance. The module has a 0.288" dia SS stand off molded in with a #6-32 though hole at the center. Dimensions are 1"x1"x0.563" with 0.063" radiused corners. The connections are the same format as the 1364, with a new pattern.
Anyone have an application for this much power that can test a prototype? I'll have 5 of them from the proto run. jt -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/562e7a78-8d72-40a5-937e-7332ad2ebb77%40googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
