On Tuesday, December 17, 2013 4:11:06 PM UTC+1, Nick wrote: > On Monday, 16 December 2013 14:51:14 UTC, Nigel Walker wrote: >> >> Just got my Itead boards. That's about two and a half weeks from order >> to delivery to the UK. >> > > Quality? Photos? What's the solder mask/silk screen registration like? All > holes in the middle of pads? etc... >
I can show you what some of my boards look like. The fragment shows a QFN-24 chip, and some 0603 caps, the traces are 10mil. Looks uglier than in reality because of reflections (that's not smeared silkscreen paint you see on the traces, just reflections). I've never seen problems with drill alignment, but silkscreen can be a little off, note the difference between the pictures (another board from the same batch). Never found it to be a problem in practice. Overall, I'd say I got exactly what I expected. Don't expect miracles, but the quality is fairly good, and price/performance is excellent. --J. <https://lh6.googleusercontent.com/-H9VZXgwzwa0/UrGJz4mB3RI/AAAAAAAAAQE/QoHxgxnH0gY/s1600/1312181233_1.jpg> <https://lh4.googleusercontent.com/-Hz1b3CePp5s/UrGJwwnDalI/AAAAAAAAAP8/A2G3pDK412M/s1600/1312181233_0.jpg> -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/6508a371-47fc-4ec3-8c44-3e1c17b10216%40googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
