Here's how I straighten pins. First of all I NEVER hold on to the glass
of a tube while straightening pins. I use a small pair, of smooth jaw,
duck bill pliers, by placing them on the pin in the area of the bend and
then squeeze the handles gently. Move around, and up and down on the pin
to several different locations if necessary, until the pin is as
straight as it's going to get. Do NOT hold the glass part of the tube
and bend the pin against the glass as it could very well crack the
glass. If the bend is far enough away from the glass, you MAY be able
to use a second pair of 'small' nose pliers to hold onto the pin, as
close to the glass as possible, and then use the duck bill pliers to
accomplish the straightening. Other folks here may have better, and or
different ideas, so WAIT until other folks here respond to you as well.
Pick the ideas that you think will work best. I'd hate to be the one
responsible for the breaking of a Nixie tube. The above process that I
outlined above has worked well for me for many years. Ira.
On 1/24/2014 6:04 AM, Alex Rubli wrote:
My cat tipped my nixiechron to the floor. Only one tube got broken, but other 3
has severly bent pins. What is the best way to get them streight again ?
Regards
Alex
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send an email to [email protected].
To view this discussion on the web, visit
https://groups.google.com/d/msgid/neonixie-l/52E2841D.8060605%40HUGHES.NET.
For more options, visit https://groups.google.com/groups/opt_out.
<<attachment: IRACOSALES.vcf>>
