Pictures, please........Thanks for the info Nick.
On Tuesday, February 18, 2014 10:41:00 AM UTC-5, Nick wrote: > > On Tuesday, 18 February 2014 15:30:10 UTC, Greg P wrote: >> >> Please post more pictures of the modifications, and especially the back >> where the new GPS plugs in. >> >> Beautiful clock, BTW.....Nice to see it "alive" again. >> >>> >>> All the mods are Jeff's - the old OnCore unit, CR2032 holder & antennae > BNC were removed, the original BNC hole was reamed out to 13mm and an > in-line PS2 female connector mounted into the cavity (its a tight fit), the > space for the MAX232 was populated and the PS2 connector wired in (Vcc, > GND, RXD, TXD) - a new Haicom HI-204III GPS puck plugs into that - the > anode resistors were changed to a slightly lower value, the current limit > on the HV SMPS was upped by 30%, the PIC was replaced with one with new > firmware, plus a few other minor electronic & cosmetic changes etc. > > It now locks in under 30 seconds and is as stable as a rock. > > Nick > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/376c6316-350f-4ca7-8519-c41cf3cb2e57%40googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
