Thanks, I understand. Well I don't have a very high voltage in the Clocks...
but it is a method - yes.
Dieter
----- Original Message -----
From: "David Forbes" <[email protected]>
To: <[email protected]>
Sent: Monday, June 09, 2014 6:30 PM
Subject: Re: [neonixie-l] Question on Z5660M Tubes- What kind of gas and age
survival?
Dieter,
Another idea is to use a decimal point, if the tube has one, as a
secondary anode for a very high voltage trigger pulse. This would work
similar to the xenon flash tubes in cameras.
On 6/9/14 8:56 AM, Dieter Waechter wrote:
You all surely know the problem, that if a standard Nixie tube is off for
a longer time, say 1 hour, and switched on at night, it takes some time
(0.1 ... 3 seconds) until the glowing comes up.
Does anyone know a method to speed up the ignition in this condition?
I have found out that:
- higher voltage does not make a change
- higher target current does not make a change
- slew rate of the switch (means a sharp pulse) does not make a change
It looks like nothing helps to make it glow immediately.
All the best
Dieter
----- Original Message -----
From: John Rehwinkel
To: [email protected]
Sent: Monday, June 09, 2014 5:37 PM
Subject: Re: [neonixie-l] Question on Z5660M Tubes- What kind of gas
and age survival?
I don't think there would be any need to add helium, hydrogen, or
even krypton-85 to *indicator* tubes.
Helium and hydrogen no, but some 5092s had Kr85 for rapid ionization
for multiplexed use. Discussion on this list from 2010:
https://groups.google.com/forum/#!topic/neonixie-l/cKkyRyaGOGI
- John
--
David Forbes, Tucson AZ
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
To post to this group, send an email to [email protected].
To view this discussion on the web, visit
https://groups.google.com/d/msgid/neonixie-l/5395E121.90906%40dakotacom.net.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send an email to [email protected].
To view this discussion on the web, visit
https://groups.google.com/d/msgid/neonixie-l/158A1FBF98534AF487AC92D8B78BE43E%40workstation.
For more options, visit https://groups.google.com/d/optout.
