Do you have a drill-press ? I've turned a few items on my drill press with satisfactory results.
Other than that, I would place the cap (open-end pointing downward) over a small-diameter woodscrew pointing straight-up, and balance it as best you can. Once you find that spot, press the cap downward on the nail to make a dimple in the plastic cap. Then, choose drillbit slightly smaller than the woodscrew and drill your first hole at that spot. Screw the woodscrew into the hole in the cap, and try spinning it like a top. If it wobbles too much, you might be able to nudge the hole in a different direction as you change to larger drillbits getting to the final hole-size. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/880892fe-c8ab-433d-b6e2-00c138737323%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
