On Thursday, 31 July 2014 14:49:18 UTC+1, Michail wrote: > > Keep in mind, I think he said that 2 of the wires were changed. So, the > end had to be replaced to make this happen. I believe later changed so > that the wires were swapped at the unit instead of changing the end. > That was on the FLW he did with Pete Hand - The problem was, I believe, that the orientation of the GPS connector on the PCB was rotated through 180 degrees or moved to the other side of the board (whatever!) which resulted in all the pins being mirrored, so each puck had to have the miniDIN-6 connector cut off and a new one re-wired... Jeff mentioned having to do 100s of them...
I have one of these FLWs and they are lovely - mine has pride of place on our bedside bookcase... Nick -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/9866a139-ddde-43af-a36b-a14bd9614005%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
