<https://lh4.googleusercontent.com/-dh0pc4jYgvQ/U-BDeKATYII/AAAAAAAADGo/u_-513wHCi0/s1600/unnamed.jpg> I packed up my half finished clock quite some time ago and I just decided to try playing with it again. However I am immediately running into this problem that I had before. Something is going sour with these K155ID1 chips and making the 3 and the 4 just go fuzzy and weird. I had a bunch of spare chips but now as I replace them they just keep doing it so now I am afraid that I am burning them as I go whereas before it would just be occasional. I don't want to try all of my spares if I am just killing them.
I can't find anything on google about this. I don't really know what I could be doing to cause this. I am pretty sure that it is an issue with the chips because I have always had it happen occasionally even when I was just breadboarding and stuff. And the problem would always follow the particular chip, if I moved it the problem would follow. If I replaced it, it would go away for some time. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/34aee780-0b5a-4a43-9497-03fe2e8b928c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
