Reprogramming the GPS module is not enough - the electrical interface to these clocks is different to the miniDIN-6 connector used by the GPS puck. Whatever path you take, just reprogramming the puck is not enough - mechanical changes are needed that are probably well beyond the capabilities of most of the owners of these clocks.
The board I was proposing would not need an extra PSU - it would run off the same supply as that given to the GPS puck - and I doubt that it'd be more that 2cm x 2cm in size (by far the biggest component would be the miniDIN-6 socket, though even that could be an in-line version) - the pcb could be just sealed with heat-shrink and be inline with the cable - in-line miniDIN -> tinyPCB - > BNC for clock. Nick -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/583a0913-8fd7-4dce-b9ec-f06be3bc0284%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
