First off, B9012 is two concentric 'circles' of pins, though one of those circles is only 3 pins so it's not really a full circle...
But anyway, no, sockets for these are unobtainium because of this two row thing. I saw that page, and even before I saw it, I was wondering the same thing. D-sub pins are .040" and the B9012 datasheet says the pins are .043" diameter. A little off, so if it does work, it'll be a tight fit (depending on the style of the pin). On Tuesday, November 4, 2014 11:30:12 AM UTC-6, threeneurons wrote: > > They're not the same base as the B5092 ??? > > > If not, then here's what I do: > > http://threeneurons.wordpress.com/miscellaneous-projects/improvised-tube-sockets/ > > > I have one B9012, that I got years ago. I also have sockets for the B5092, > which are also good for other nixie tubes, and dekatrons like the Z504S. > I'll see if they mate. Or, someone else can confirm, either way, if they > are a match, or not. If they are a match, those sockets are currently > available, from China, thru eBay. I'll not post that link until I can > confirm that they *DO* match. > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/e67e4ba1-10b8-4fa9-bf0e-7f534e373da5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
