Well the issue has nothing to do with the board i bought, it’s with my own board/tubes that i’m having problems with. So disregard that i am using that board to essentially boost the voltage to 180V and nothing more right now.
As it is right now, disconnecting the 20-way cable from my board and only connecting a current-limited power supply to one of the cathodes and an anode will make a tube light up, and usually one of the others, too. That’s my problem. // Per. > On 07 Jun 2015, at 02:58, blkadder <[email protected]> wrote: > > I built one of the Switch Mode cut and jump shields, and I didn't have any > issues at all. I did have to adjust the voltage, but I got it working > without incident. Have you contacted anyone over at SWD? They are really > good about customer service. Not sure why you are having the ghosting. > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/4A285117-FE07-400E-BDC9-6E4CA36F6E0D%40gmail.com. For more options, visit https://groups.google.com/d/optout.
