Very nice! Woodwork looks great.
On Wednesday, December 23, 2015 at 2:57:43 AM UTC-5, gregebert wrote: > > Here's a not-so-good photo of my current clock project. There are sockets > for eighteen IN-18 tubes, of which 14 are used. The first 8 are for the > date in MM-DD-YYYY format, and the last 6 are for time in HH:MM:SS format. > On each end, are control boxes. The one on the left is the selector switch, > and the one on the right has 4 incandescent status lamps, and toggle > switches for setting the time. > > I still need to finish wood-staining the center section, and the FPGA code > to read the realtime clock module isn't finished yet. And I need to add > colons. If all goes well, the final touches will be laser-printer decals on > metal plates, similar to equipment from the 1930's. > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/3da7896a-034f-40e3-998d-1dd8a14a4e4c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
