Nice! Could it be that you have a timing issue with the guides not being totally "off" when you do the reset?
Or that the reset does not load the cathode enough so that the glow steps to a lower potential, being K9? You can also check what happens if you exchange the guides, then it should step to 1 instead of 9 - unfortunately not telling you what the problem is but it should at least be another way of measuring what's happening. One more thing to try is to add a resistor in the RTN +55V power line as that then changes the balance between K0 and the other guides. /Martin -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/fd2c6c23-e159-4d7a-8c17-25241d5dfbbf%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
