I must say that thr circuit and the software part for me is very easy, but I have checked your newest design picture,seems the SMD socket which you use for installing the NIXIE tube is the 2.0mm female socket,I bought a lot of different brand socket,from 2.0mm to 1.5mm gaps, seems this kind of socket is designed for hold the squire shape pins,not good for the small round NIXIE tube pins. Currentlly I have tried to customize the round female pins from the factory,if works fine,I will strart to do the rest jobs,hope I can post my design of NIXIE watch in the future.
Best reagrds. 在 2017年2月8日星期三 UTC+8上午12:38:32，nixiebunny写道： > > Since there's a new Nixie watch player, I thought I'd give a brief > pictorial history of how many times I had to redesign my Nixie watch > before I was happy with it. > > I also have a pile of non-working watch modules that's bigger than the > total production of every other Nixie watch maker on the planet. Which > is a few dozen watches. (I've made about 1500 watches by now.) > > > -- > David Forbes, Tucson AZ > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/a8267a24-0371-47e9-aa8c-a67f8282df2c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
