Just occurred to me, that hours may be a bit weird. A dekatron having 30 rods, works well for seconds and minutes. For those hands, just advance their locations, once every 2 seconds, or minutes, respective of which hand, it represents.
Hours is a bit odd. That's why on my original one dekatron clock, the "hour hand" dithers, around the correct hour position, since 30 doesn't divide evenly into 12. But if its truly an analog representation, that need not be a requirement. Since on an old analog clock, all hands were in constant motion. So here, the "hours hand", advances every 24 minutes (0.4 hour), assuming a 12-hour clock. On Thursday, June 1, 2017 at 6:02:26 PM UTC-7, Paul Andrews wrote: > > Clock code is on my github <https://github.com/judge2005/DekatronClock>. This >> <https://youtu.be/zTOlxwlTwDU>is a video of it running at 100x. >> > > @greg. Yes it is an A101. I step between 'lit pins' about once every > 80-100us. I linger on each lit pin for about 7000us. > > It was inspired both those small persistence-of-vision USB clock/fan > gizmos. > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/7975b80b-8d85-47de-a862-b09218ce7a7a%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
