Found this on ebay; not my listing: http://www.ebay.com/itm/Sperry-Gas-12-Hour-Clock-Digital-SP-151-Nixie-Display-Tubes-Panaplex-/222652999099?epid=2232577033&hash=item33d72725bb:g:rVYAAOSwPe9ZtcgV
The same seller also has a lot of 25 units for a really good price at the moment. This is the same display I have in my nixie watch. It can be multiplexed or direct-drive. You will need a PCB to solder to the display itself. OSH Park could probably do it for about $10 US per board. If there is sufficient interest I can slice-off the display-driver board from my nixie watch project and make the gerbers available. My design is direct-drive with current-regulation on each segment, and a serial interface to control the segments. The main drawback to my driver board is that some segments are not controllable for general-purpose usage; it must be for a clock. The lower-2 digits will display 0-59, and the upper will display 0-12. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/03d6e8f3-9013-4c1e-b826-d6659ad7499b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
