This is absolutely glorious! I love it. It would be swell to create a modernized BoM and see if a modern simulated kit could be assembled for broader use by us nixonians here.
On Tuesday, March 13, 2018 at 1:57:08 PM UTC-4, Mitch wrote: > > I just finished doing a little restoration on this clock. I replaced the > electrolytics and missing feet, cleaned the contacts, and dusted it off. > One of the ZM1000s was bad, but only because I dropped it on the floor. I > bought the clock several years ago, It came with both issues of the > magazine, a complete set of extra tubes, ICs, circuit boards, and various > components including documentation from Southwest Technical Products. > Obviously the builder had in mind to keep it running through the ages. > > This version also reads tenths and hundredths of seconds. The original > projects in consecutive issues of Popular Electronics from December, 1970, > and January 1971, were for four and six digit clocks, so the builder > customized the design himself. I don't plan on keeping it running > continuously, just special occasions. > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/3c3afba9-9121-40fd-8d6b-9aa201c2de21%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
