I did have to update the Nixichron firmware for the BR355. A side benefit was corrected handling of the DST changeover.
On Wednesday, March 21, 2018 at 2:04:02 AM UTC-5, Terry Kennedy wrote: > > On Wednesday, March 21, 2018 at 12:25:12 AM UTC-4, Pramanicin wrote: >> >> I can’t locate a reasonably priced HaiCom replacement....I’ll check out >> the Gstar. I have some GlobalSat BR355’s with the PS/2 plug but there was >> no pin out info in the GPSII manual that I’m aware of....are they >> compatible? >> > > The pinout is compatible. However, note that most of the earlier Jeff > Thomas clocks / firmware require the 1PPS signal on the PS/2 connector, > which more modern receivers don't provide. The clock probably displays its > firmware date on power-up, in MMDDYY format. On the NixiChron, the first > firmware to support receivers without 1PPS was 110105 and the last > firmware that required 1PPS was 040604. I have heard (anecdotally) that > there may be a slight modification needed on the PCB for older (not > NixiChron) clocks. Someone will likely be along with additional details > shortly. > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/72715f57-b0f2-4a67-b453-4e538b948127%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
