Nice find on the power supply; very good for nixie work. Generally, I crank the voltage way up, to around 300V, and adjust the current until I get proper glow or the datasheet spec. Just be careful with the current. That supply *WILL* kill you if you aren't careful: 100-200mA of current thru your body is fatal.
I never found a supply online that exactly matched what I needed for bench-testing nixies, so I ended up building my own bench supply a few years ago (I posted on this forum). It looks like your supply has the most-important features: Separate volt & mA meters, and adjustable current-limit. Changing the current-adjust to a 10-turn pot would be the only upgrade I can think of; I have that on my supply and it's one of the best and most-used features. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/a08b204c-525d-4f2e-971b-6ec36f1db142%40googlegroups.com.
